Sikacoat Roof Coatings

Sikacoat® AE400

Sikacoat AE400 is a water-based, asphaltic bentonite clay emulsion for use as a surface coating and waterproofing compound over existing bituminous roofs (modified bitumen and smooth surfaced BUR), and EPDM, TPO and Hypalon® single ply roofs prior to installing Sikacoat roof coatings. When cured, Sikacoat AE400 resists checking and cracking. The dry film remains flexible and will not sag, flow or re-emulsify.

Sikacoat® RF400D

Sikacoat RF400D is a 3 ounce, soft finish stitch-bonded polyester fabric used as reinforcement when applying a three-course application at details or when repairing existing roof defects such as cracks, tears, open seams and deteriorated flashings prior to installing the Sikacoat roof coating system

Sikacoat® RF400F

Sikacoat RF400F is a 2.9 ounce, firm finish stitch-bonded polyester fabric used as the reinforcing layer when installing a fully-reinforced Sikacoat roof coating system. 

Sikacoat® S450

Sikacoat S450 is a one component, nonshrink, advanced technology polyurethane sealant. It is semi self-leveling so that it can be used to seal vertical seams & fasteners on metal roofs with minimal tooling. It can also be used to fill pourable sealer pockets

Sikacoat® FC3500

Sikacoat FC3500 is a premium quality, acrylic elastomeric roof coating that meets or exceeds ASTM D6083 requirements. Sikacoat FC3500 is used as a finish coat over single-ply (EPDM, TPO, Hypalon® and PVC), bituminous (modified bitumen and smooth surface BUR) and metal roofing.

Do not apply Sikacoat FC3500 over wood shingles or untreated wood surfaces. Sikacoat FC3500 is available in White, Tan and Light Gray

Sikacoat® BC430

Sikacoat BC430 is a water-based acrylic base coat specially formulated for use with Sikacoat FC3400 finish coat over TPO single ply membranes.

Do not apply Sikacoat BC430 over wood shingles or untreated wood surfaces.

Sikacoat® BC420

Sikacoat BC420 is a water-based acrylic base coat specially formulated for use with Sikacoat FC3500 finish coat over single ply (EPDM, TPO, Hypalon® and PVC), bituminous (modified bitumen and smooth surface BUR) and metal roofing. Use Sikacoat BC420 with Sikacoat FC3400 finish coat
over EPDM single ply membrane.

Do not apply Sikacoat BC420 over wood shingles or untreated wood surfaces.

Sikacoat® BC400

Sikacoat BC400 is a water-based acrylic base coat specially formulated for use with Sikacoat FC3400 finish coat over Hypalon® and PVC single-ply membranes, bituminous (modified bitumen and smooth surface BUR) and metal roofing.

Do not apply Sikacoat BC400 over wood shingles or untreated wood surfaces.

Sikacoat® S400

Sikacoat S400 is a high quality, water-based, elastomeric acrylic sealant. Sikacoat S400 is used for repairs and sealing around flashings and penetrations prior to applying the Sikacoat coating.

Sikacoat® W400

Sikacoat W400 is a low viscosity detergent wash intended for application to all types of roof surfaces prior to power washing. Sikacoat W400 lifts dirt and grease from the surface of the roof. Sikacoat W400 is formulated from surfactants and alkaline cleaning agents. Sikacoat W400 must be used to
clean all EPDM surfaces

Sikacoat® FC3400

Sikacoat FC3400 is a premium quality, acrylic elastomeric roof coating. Sikacoat FC3400 is used as a finish coat over single-ply (EPDM, TPO, Hypalon® and PVC), bituminous (modified bitumen and smooth surface BUR) and metal roofing.

Do not apply Sikacoat FC3400 over wood shingles or untreated wood surfaces. Sikacoat FC3400 is available in White, Tan and Light Gray