Micro Fibers

SikaFiber® HP

SikaFiber® HP is a new generation of micro monofilament polypropylene fiber for use in concrete. SikaFiber® HP is specifically designed as secondary reinforcement for the purpose of controlling plastic shrinkage and settlement cracking.

SikaFiber® FN

SikaFiber® FN is a pre-packaged monofilament nylon micro-fiber for use as secondary reinforcement in concrete. Manufactured from 100% virgin nylon (polyamides), SikaFiber® FN is engineered to sufficiently resist the high alkaline environment of Portland cement concrete. Designed to outperform other synthetic secondary concrete reinforcement, this monofilament fiber possesses excellent UV stability and high tensile strength. Sika Fiber FN meets the requirements of ASTM C-1116, Type III fiber.

SikaFiber® AC 100

SikaFiber® AC 100 is a new generation of micro monofilament acrylic fiber for use in concrete. SikaFiber® AC 100 is specifically designed for the purpose of controlling plastic shrinkage and settlement cracking. SikaFiber® AC 100 meets the requirements of ASTM C-1116, Type III.

SikaFiber® PPM 150

SikaFiber® PPM 150 is a monofilament polypropylene fiber (manufactured from 100% virgin polypropylene resin) specifically engineered for use in concrete as secondary reinforcement and for controlling plastic shrinkage and settlement cracking. SikaFiber® PPM 150 meets the requirements of ASTM C-1116, section 4.1.3 Type III fiber.

SikaFiber® PPF 300

SikaFiber® PPF 300 is a fibrillated polypropylene fiber for use in fiber reinforced concrete. SikaFiber® PPF 300 is primarily used for the purpose of providing secondary/temperature shrinkage reinforcement in concrete. The fibrillated pattern of SikaFiber® PPF 300 optimizes the mechanical bond between the mortar matrix and fiber networks providing better control of plastic shrinkage cracking and plastic settlement cracking. SikaFiber® PPF 300 provides a good alternative to welded wire fabric in light commercial and residential slab-on-grade applications. SikaFiber® PPF 300 meets the requirements of ASTM C-1116, Type III fiber. Fibers should be added to the concrete mix at a rate of 1.5 lbs/cu.yd.

SikaFiber® PPM

SikaFiber® PPM is monofilament polypropylene fiber for use in fiber reinforced concrete and shotcrete. SikaFiber® PPM is specifically designed for use in concrete as secondary reinforcement and for the purpose of controlling plastic shrinkage and settlement cracking. SikaFiber® PPM meets the requirements of ASTM C-1116.

SikaFiber® PPF

SikaFiber® PPF is fibrillated polypropylene fiber for use in fiber reinforced concrete and shotcrete. SikaFiber® PPF is specifically designed for use in concrete as secondary reinforcement and for the purpose of controlling plastic shrinkage and settlement cracking. SikaFiber® PPF meets the requirements of ASTM C-1116.