Flashings

Sarnaclad

Sarnaclad is a heat-weldable flashing product used with Sarnafil G and S membranes to form a monolithic roofing or waterproofing system

Sarnastack Split

Sarnastack Split is 60 mil (1.5 mm) thick prefabricated pipe boot open along one side to provide a simplified flashing solution for pipes, vent stacks and round penetrations up to 7 inches (178 mm) in diameter when access is obstructed and does not allow for the use of a Sarnastack Universal pipe boot.

Sarnareglet

Sarnareglet is a heavy-duty counterflashing used as a key component within certain flashing details for Sika Sarnafil roofing and waterproofing systems. Sarnareglet has a 2-¼ in (57 mm) deep profile and is provided in 10 ft (3.05 m) lengths. Sarnareglet is produced from 6063T5 extruded aluminum and is provided with predrilled holes at 8 in (20 cm) o.c. for attachment to walls or curbs.

Sarnacircles

Sarnacircles is a 60 mil (1.5 mm) thick prefabricated circle used as a time-saving and attractive patch on a Sika Sarnafil roofing or waterproofing installation.

Edge Grip Fascia

Edge Grip Fascia is a low profile retainer bar and fascia assembly used with either an adhered or mechanically attached Sika Sarnafil Roof System, which clamps the roof membrane against the building to help prevent leaks and blow-offs.

Edge Grip Extruded Fascia

Edge Grip Extruded Fascia is a low profile extruded retainer bar and fascia assembly used with either an adhered or mechanically attached Sika Sarnafil Roof System, which clamps the roof membrane against the building to help prevent leaks and blow-offs.

Sarnaclad - SS

Sarnaclad - Stainless Steel is a heat-weldable flashing product used with Sarnafil G and S membranes to form a monolithic roofing or waterproofing system.  Sarnaclad - SS is a 24 gauge, stainless steel T-304 metal sheet with a 34 mil (.86 mm) unsupported Sarnafil membrane laminated on one side.

Sarnacorners-Inside

Sarnacorners - Inside are a 60 mil (1.5 mm) thick prefabricated corner used as a time-saving and attractive part of a wall flashing detail. Sarnacorners - Inside come in EnergySmart white

Sarnacorners-Outside

Sarnacorners - Outside are a 60 mil (1.5 mm) thick prefabricated corner used as a time-saving and attractive part of curb and wall flashing details. Sarnacorners - Outside are available in EnergySmart white

Wall Grip Coping

Wall Grip Coping is a metal coping with hold down cleats and metal drain chairs for capping most any parapet. Wall Grip Coping is used with either an adhered or mechanically attached Sika Sarnafil Roof System to secure and protect membrane flashings.

Wall Grip Coping Plus

Wall Grip Coping Plus is a metal coping with hold down cleats and metal drain chairs for capping most any parapet. Wall Grip Coping is used with either an adhered or mechanically attached Sika Sarnafil Roof System to secure and protect Sarnafil membrane flashings in higher wind speed areas (contact your Sika Sarnafil representative for details).

G459 Flashing Membrane

G459 flashing membrane is a heat-weldable roofing membrane formulated for direct exposure to the weather and is produced with an integral fiberglass mat reinforcement for dimensional stability. G459 flashing membrane is used to flash roof penetrations.  G459 flashing membrane can be adhered directly to asphalt-contaminated surfaces. G459 flashing membrane is produced in various widths and lengths.

Detail Membrane

A heat weldable thermoplastic PVC membrane used in Sarnafil® and Sikaplan® roofing and waterproofing flashing details. Detail Membrane is produced with an integral fiberglass mat reinforcement for dimensional stability and is more pliable than Sarnafil G410 flashing membrane making it easier to stretch and weld. Detail Membrane is intended for flashing pipes, inside/outside corners and unusual shaped penetrations.

Sika® Sarnastack Universal

Sarnastacks are 48 mil (0.048 in./1.2 mm) thick prefabricated membrane
flashings. Sarnastacks are a time-saving and convenient method to flash rooftop vent stacks and pipes. Sarnastacks simplify the flashing procedures for various penetrations, reducing the risk of leakage at small to typical pipe size penetration details.