Sikafloor® WP-2
0.0 (0)
Oil modified urethane Varnish. A clear coating formulated to provide a durable, solid protective film.
- Superior Gloss
- Abrasion resistance
- Excellent rubber burn resistance
- Lightness in color
- Excellent film hardness
Usage
New and existing wood sports floors in public and private schools, universities, professional arenas, and health clubs.Advantages
- Superior Gloss
- Abrasion resistance
- Excellent rubber burn resistance
- Lightness in color
- Excellent film hardness
Packaging
Product is available in 5 gallon (18.9 L), containers.
Color
| 3 - 6 | (ASTM D-1544) |
Product Details
Shelf Life
2 years in original unopened container under proper storage conditions.
Storage Conditions
Store dry between 40° - 90°F (5°- 32°C).
Solid Content
| 35+/- 1% | (ASTM D-1644) |
Solid content by weight
| 7.0 - 7.3 lbs. | (ASTM D-1475) |
Volatile organic compound (VOC) content
<560 g/L
Flash Point:
| 105°F (40.5°C) | (ASTM D-56) |
Viscosity
| 20 – 50 cps | (ASTM D-1545) |
Chemical Resistance
| Stain Resistance | Pass |
| Alcohol Resistance | Pass |
| Naphtha Resistance | Pass |
| Cola Resistance | Pass |
| Beer Resistance | Pass |
| Perspiration Resistance | Pass |
Gloss Level
(60°) 90+
Application
Cure Time
Allow over night dry (8 Hrs min. 20 Hrs max.) before recoating. Finish with a second coat of Sikafloor WP-2. If the first coat of Sikafloor WP-2 cured over 20 hours abrade floor with a #120 grit screen, do not use #100 grit here. Allow 48 hours cure before light traffic and 5 - 7 days before athletic activities. Adequate ventilation is imperative during the curing process. Dry times will vary based upon the drying conditions. Do not apply when temperature is above 95 F (35°C) or below 65 F (18°C), or when humidity is above 80%. Clean up with mineral spirits.
Coverage
400-500 sq. ft/ gal. (37 m2-46.5m2/L)
MIXING
NOTICE: THIS PRODUCT IS DESIGNED TO BE USED AS IS. DO NOT REDUCE OR THIN WITH SOLVENTS.
APPLICATION
With a conventional lambswool or foam applicator or weighted T-bar applicator, apply Sikafloor WP-2. Do not allow the finish to puddle.
CLEANING
In case of spill, eliminate all ignition and heat sources. Ventilate area. Open doors and windows. Wear chemical resistant gloves/goggles/clothing. In absence of proper ventilation use properly fitted NIOSH respirator. Confine spill, collect using noncombustible absorbent material and place in properly sealed container. Dispose of excess product in accordance with applicable local, state and federal regulations.