Product Data Sheet Safety Data Sheet Show all documents

SikaHyflex®-150 LM

ONE PART, LOW MODULUS, HYBRID SEALANT

SikaHyflex®-150 LM is a premium-grade, high movement, fast curing, one component, non-sag, elastomeric, hybrid sealant. Meets ASTM C-920, Type S, Grade NS, Class 50, use NT, M, A, G, O.

  • Fast skin time (~60 min)
  • Excellent adhesion to porous and nonporous substrates
  • Superior UV resistance and weathering
  • Color retention – white stays white
  • Can be over-painted immediately after application.
  • Very low VOC
  • Non-staining
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • For joints or gaps connecting dissimilar substrates – e.g. vinyl to concrete, aluminum to EIFS.
  • Window Perimeter
  • Expansion joints
  • Curtain Wall construction
  • For applications that require both paintability and adhesion to non-porous substrates
  • When easy cold weather application is desired
 

Advantages

  • Fast skin time (~60 min)
  • Excellent adhesion to porous and nonporous substrates
  • Superior UV resistance and weathering
  • Color retention – white stays white
  • Can be over-painted immediately after application.
  • Very low VOC
  • Non-staining

Packaging

10.1 fl. oz. (300 ml) cartridge
20 fl. oz. (600 ml) uni-pac sausage

Color

White, Limestone, Off-white, Tan, Stone, Aluminum Gray, Redwood Tan, Medium Bronze, Special Bronze, & Black

Product Details

Product Information

Shelf Life

12 months

Storage Conditions

Store dry between 40 °F (5 °C) and 80 °F (27 °C) at 50 % R.H. Condition Material to 65–75 °F (18–24 °C) before using.

Volatile organic compound (VOC) content

See Product Safety Data Sheet

 
Technical Information

Shore A Hardness

20

(at 73 °F (23 °C) and 50 % R.H) (ASTM C-661)

Tensile stress at specified elongation

60 psi at 100 %

(at 73 °F (23 °C) and 50 % R.H) (ASTM D-412)

Movement Capability

± 50 %

(at 73 °F (23 °C) and 50 % R.H.) (ASTM C-719)

Adhesion in peel

Aluminum

36.5 pli

Glass

33.8 pli

Concrete

31.0 pli

Service Temperature

-40–170 °F (-40–77 °C)

Resistance to Weathering

Excellent

Color

Stain and color change: None

(ASTM C-510)

Application

Application Information

Ambient Air Temperature

40–100 °F (4–38 °C). Sealant should be installed when joint is at midrange of its anticipated movement.

Tack Free Time

~ 1 h

(at 73 °F (23 °C) and 50 % R.H.) (ASTM C-679)
Consumption

Coverage

10.1 oz (300 ml) Cartridge: Yield in Linear feet

Width/Depth1/4''3/8''1/2''
1/4''24.3

3/8''

16.210.8

1/2''

12.18.16.1
3/4''8.15.44.0
1''3.0
1.25''2.4
1.5''2.0

20 oz (600 ml) Sausage: Yield in Linear feet

Width/Depth1/4''3/8''1/2''
1/4''48.1
3/8''32.121.4
1/2''24.116.012.0
3/4''16.010.78.0
1''6.0
1.25''4.8
1.5''4.0
Application steps

SUBSTRATE PREPARATION

The substrate must be clean, dry, frost free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion.

POROUS SUBSTRATES – clean by mechanical methods to expose a sound surface free of contamination and laitance.
NON-POROUS SUBSTRATES – for cleaning non-porous substrates, use two rag wipe method using alcohol, xylene or an approved commercial solvent. Allow solvent to evaporate prior to sealant application.

   

Priming

SikaHyflex®-150 LM is designed to obtain adhesion without the use of a primer; however, certain substrates may require a primer. Test by applying the sealant and/or primer sealant combination to confirm results and proposed application methods. *In the situation where primer is needed on porous surfaces use Sika® Primer 429. For non-porous surfaces contact Technical Services for proper recommendation.

Documents