Product Data Sheet
Show all documents

SikaControl® FD-100

INTEGRAL FRESH CONCRETE DENSIFIER

SikaControl® FD-100 is a formulated liquid admixture used to densify freshly mixed concrete in interior flooring applications. SikaControl® FD-100 meets the requirements of ASTM C494, Type S admixture.

SikaControl® FD-100 increases density of freshly mixed non air entrained concrete. SikaControl® FD-100 is suitable for interior flooring applications with a hard trowel finish. Use of SikaControl® FD-100 results in dense concrete with reduced amount of pinholes, open pores and other surface defects.    SikaControl® FD-100 helps to achieve concrete properties as described in the ACI 302.1R-15 - Guide to Concrete Floor and Slab construction. SikaControl® FD-100 provides the following advantages:
  • Concrete with minimum surface defects
  • Reduced risk of blistering and delamination issues
  • Easy to finish polished surface
  • Improved concrete aesthetics
  • Improved concrete uniformity and reduced risk of claims related to elevated air content
  • Improved concrete durability
Product Data Sheet
Show all documents

Usage

SikaControl® FD-100 is recommended for use in Interior Concrete Slabs with highly aesthetical requirements and machine finished surface (hard troweled floors) such as:
  • Warehouses
  • Show Rooms
  • Shopping malls
  • Parking garages
  • Schools / Hospitals
  • Retail stores
  • Hotels
  • Manufacturing facilities
SikaControl® FD-100 is designed for use in non air entrained concrete applications only.  

Advantages

SikaControl® FD-100 increases density of freshly mixed non air entrained concrete. SikaControl® FD-100 is suitable for interior flooring applications with a hard trowel finish. Use of SikaControl® FD-100 results in dense concrete with reduced amount of pinholes, open pores and other surface defects.    SikaControl® FD-100 helps to achieve concrete properties as described in the ACI 302.1R-15 - Guide to Concrete Floor and Slab construction. SikaControl® FD-100 provides the following advantages:
  • Concrete with minimum surface defects
  • Reduced risk of blistering and delamination issues
  • Easy to finish polished surface
  • Improved concrete aesthetics
  • Improved concrete uniformity and reduced risk of claims related to elevated air content
  • Improved concrete durability

Packaging

SikaControl® FD-100 is available in 55 gallon drums (208 liters), 275 gallon (1040 liters) totes and bulk delivery.

Color

Yellowish Liquid

Product Details

Product Information

Shelf Life

Shelf life when stored in dry warehouse conditions between 40 °F and 80 °F (5–27 °C) is 6 months from date of manufacture. Protect from frost and direct sunlight.

Storage Conditions

Should be stored above 40 °F (5 °C). If frozen, thaw and agitate thoroughly to return to normal state.

Specific gravity

Approximately 0.89

Application

Application Information

Mixing

To achieve the best performance add SikaControl® FD-100 into the mixing water. In cases when this is not possible, SikaControl® FD-100 can be dispensed directly to freshly mixed concrete in the mixer at the end of batching cycle. To achieve proper dispersion of the product throughout the entire concrete volume, mixing time of minimum 90 seconds is recommended. SikaControl® FD-100 should not be dispensed directly onto cement, slag or fly ash.

 

Combination with other Admixtures: SikaControl® FD-100 can be used in combination with other Sika admixtures, however, each admixture should be added separately to the mix. It is always recommended to verify actual performance by conducting trial batches.

Do not use SikaControl® FD-100 in air entrained concrete.
In cases, when SikaControl® FD-100 is stored in bulk tanks, periodical checks of dispensing lines are recommended to prevent product leakage. Use only oil resistant hoses. SikaControl® FD-100 may cause deterioration of rubber hoses.Please contact your local regional office or technical service department at 1-800-933-7452 for further assistance.
Consumption

Recommended Dosage

Recommended dosage rates will be typically between 0.5 to 3.0 fl.oz/100 lbs (32.5–195 ml/100 kg) of cementitious materials.

Documents