SikaForce®-800 Blue

(former SikaForce®-7800 BLUE)

Fast curing profile and surface filler for blade repair applications

SikaForce®-800 Blue is a two component polyurethane based profile and surface filler that works best at temperature below 15 °C (59 °F). If ambient temperatures are higher than 15 °C (59 °F) it is advisable to use SikaForce®-7800 RED.  

  • Superior mixing, application and tooling properties
  • Very good adhesion to GFRP
  • Non-sag up to layer thicknesses of approx. 20 mm (0.75 in)
  • Fast sanding time
  • Easy to sand, does not clog the sandpaper
 

SikaForce®-7800 Series

Surface Fillers for Wind Blade Repair

Repair damaged wind blades quickly with the SikaForce®-7800 Series! SikaForce®-7800 Red and Blue are fast sanding surface fillers used for surface finishing and profiling of wind turbine blades. Both products offer 30 minute sanding time and are color-coded for use at different application temperature ranges.