Primers

Sikalastic® Primer

Sikalastic® Primer  is cold applied, single component, low-odor moisture-curing polyurethane resin. It is designed for sealing cementious substrate to reduce the incidence of pinholing.

Advantages:

- Significantly reduces the likelihood of blistering and pin holing.
- Fast curing formulation.
- Single component
- Compatible with most concrete, masonry, and stone substrate materials.
- Low odor
- Lo-VOC

SikaLastic® FTP Primer

Sikalastic® FTP Lo-VOC Primer

Use with Sikalastic®  Traffic Systems as a primer on concrete, cementitious or plywood surfaces exposed to vehicular or pedestrian traffic. Refer to the Sikalastic®  710 Lo-VOC/715 Lo-VOC/736 AL Lo-VOC, the Sikalastic 710/715/735 AL, and the Sikalastic 720/745 Traffic System Data Sheets for system application instructions as well as limitations.

Sikalastic® PF Lo-VOC Primer

Sikalastic®  PF Lo-VOC primer is a two-component, high solids pore filling/sealing epoxy primer for use with Sikalastic traffic deck coatings.

Use with Sikalastic®  Traffic Systems as a primer on concrete, cementitious or plywood surfaces exposed to vehicular or pedestrian traffic. May also be used to prime metal flashings and penetrations. Refer to the Sikalastic®  710 Lo-VOC/715 Lo-VOC/736 AL Lo-VOC, the Sikalastic 710/715/735 AL, and the Sikalastic 720/745 Traffic System Data Sheets for system application instructions as well as limitations.

Sika® MT Primer

A two component, high solids, red transparent epoxy primer. This epoxy primer is specially formulated to perform as a moisture tolerant primer.

Sikalastic® MT Primer is designed as a primer for Sikalastic urethane traffic coatings when the moisture content of the deck is ≥ 4% and exceeds limitations of standard primer requirements (see Sikalastic® traffic coating system data sheets). Sikalastic MT Primer is also intended as a primer for SikaLevel underlayments and patching products when the moisture content of the deck is ≥ 4%.

Sikalastic® Recoat Primer

Sikalastic Recoat Primer is a two component, high solids, liquid applied primer. Optional: Sikalastic ACL Accelerator (see separate data sheet).

Where to Use:

  • Partially completed new urethane coating systems
  • Recover of existing urethane coating systems
  • Repair of existing urethane coating systems Advantages

Advantages

  • High Solids
  • Fast Re-Coat Time
  • Low Odor
  • Low Viscosity