Adhesives/Primers/Sealants

Sarnacol®-2170 VC Adhesive

Sarnacol®-2170 VC Adhesive is a solvent-based reactivating adhesive used for Sarnafil® or Sikaplan® Adhered roofing systems. It is also used within any Sika approved roofing or waterproofing system for adhering flashings. Sarnacol®-2170 VC Adhesive is formulated for adhering membranes in a two-step process to clean, dry, surfaces with no slope restrictions.

Sarnacol®-2170

Sarnacol 2170 is a solvent-based reactivating adhesive used with a Sika Sarnafil adhered system and/or flashing detail. It is also used to adhere flashings in Sarnafil waterproofing systems. It is formulated for adhering Sarnafil PVC membranes to properly prepared substrates such as wood, sheet steel, masonry, concrete and approved coverboards.

Stabond U-148A Adhesive

Stabond U-148A is an elastomeric contact adhesive used within the Sarnafil system for flashing details. It is formulated for adhering Sika Sarnafil PVC membranes to substrate such as dry, clean wood, concrete and DensDeck Prime Roof Board.

Sarnacol®-2163 Adhesive

Sarnacol®-2163 Adhesive is a two-component foamable polyurethane board adhesive that is applied in one step and sets up in minutes.

Vapor Retarder Primer SB (US)

Sarnavap Self-Adhered Primer is a solvent-based primer used to prime wood, concrete, lightweight concrete, gypsum boards and decks, and DensDeck® boards prior to the application of Sarnavap Self-Adhered vapor barrier or Sarnafil G476 SA (Self-Adhered) waterproofing membrane.

Vapor Retarder Primer WB (US)

Vapor Retarder Primer WB (water-based) is a polymer emulsion-based primer used to prime wood, concrete, lightweight concrete, gypsum decks, and approved gypsum boards prior to the application of Sika’s self-adhered vapor retarders. Particularly recommended when the use of solvent-based primer is not advised and/or not permitted.

Sarnafiller

Sarnafiller is a pourable two component urethane sealant used as a pitch pocket filler for roofing applications. Sarnafiller is also used as a grid adhesive to bond the Sarnafil G459 flashing membrane to an acceptable substrate in waterproofing applications.

Sikaflex®-11 FC

Sikaflex®-11 FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time that meets ASTM C920 Type S, Grade NS, Class 12.5, Use NT, I, M, G, A, O. and Federal Specification TT-S-00230C.

Sarnacol® AD Board Adhesive

Sarnacol® AD Board Adhesive is a two-component foamable polyurethane adhesive that is applied in one step and sets up in minutes.

Sarnacol® OM Board Adhesive

Sarnacol® OM Board Adhesive is a two-component foamable polyurethane adhesive that is applied in one step and sets up in minutes. Sarnacol OM Board Adhesive is used to bond insulation and roof boards to approved substrates or to other insulation boards

Sikaflex® Primer-449

Sikaflex® Primer-449 is used to promote adhesion to pvc, solvent-based enamel, PPG’s fluorocarbon Duranar-finish, and certain plastics such as ABS and Plexiglass.

Sarnacol® OM Feltback Membrane Adhesive

Sarnacol® OM Feltback Membrane Adhesive is a two-component foamable polyurethane adhesive that is applied in one step and sets up in minutes. Sarnacol OM Feltback Adhesive is used to bond feltbacked Sika Sarnafil membranes to approved substrates.

Sikaplan® Water-Based Membrane Adhesive

Sikaplan Water Based Membrane Adhesive is a water-based dispersion adhesive used within a Sikaplan Adhered roofing system. It is formulated for adhering Sikaplan PVC membranes to clean, dry, water absorbent, horizontal roof surfaces with slopes up to 10° (2/12) when using the methods of installation noted below. See Technical Bulletins referring to water-based adhesive applications for roof membrane and wall flashing.

Sikaflex®-1A+

Sikaflex-1a+ is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex-1a+ can be used in green and damp concrete applications. Meets Federal Specification
TT-S-00230C, Type II, Class A. Meets ASTM C-920, Type S, Grade NS, Class 35, use T, NT, O, M, G, I.