Sika® Level-01 Primer

Sika® Level-01 Primer is a one-part, water-dispersed and solvent-free, acrylic-based solution used to prime and seal floor surfaces prior to the application of Sika® Level products range.

Where to Use: Use as a primer/sealer for absorbent substrates including concrete and cement screeds. Particularly suitable as an adhesion promoter and surface sealer beneath Sika® Level products range, enhancing the bond and integrity of the underlayment when applied onto porous substrates.

Advantages: Ready to use, no dilution required | Water-based and solvent-free | Penetrates substrate to reduce outgassing and formation of bubbles in the underlayment | Prevents water loss from the underlayment into the substrate | Quick-drying and fast film formation to increase productivity | Achieves excellent bond values throughout the recommended range of application temperatures | Effectively seals concrete surfaces in a single, economic operation

Packaging: (1 U.S. gal) jug

Technical Downloads

Product Data Sheet

Safety Data Sheet

Sika® Level-02 EZ Primer

Special Acrylic Primer for use on sound, smooth and non-porous substrates in interior areas. Applied prior to the use of Sika®  Level prodcuts on epoxy, ceramic tiles, old vinyl, linoleum and rubber coverings.

Where to Use: Many tight substrates like- terrazzo, ceramic tiles, natural stone | Old substrates with water resistant adhesive residues | Fully-bonded old elastic coverings | Old sealed/coated substrates | Epoxy moisture barrier | Metal | LVT, PVT.

Advantages: Provides optimum adhesion | No dilution required | Quick dry time | Low VOC | Solvent free | Suitable for application on subfloor radiant system | Low consumption of material

Packaging: 1 gal. pail

Technical Downloads

Product Data Sheet

Safety Data Sheet


Sika® MB

Sika® MB is a 2-component, solvent free, low viscosity, epoxy for use under wood flooring products, self leveling underlayments, floating floors and other flooring systems that require protection from sub-floor moisture.

Where to Use: Moisture barrier to help control moisture propagation in cementitious substrates with a moisture content not exceeding 6% by Tramex Method and residual moisture up to 100% R.H. or 25 lbs./1000 sq.ft./24 hrs. | For substrate consolidation on concrete, cement and gypsum screeds | Adhesion promoter for old and new adhesive residues in conjunction with other Sika® products.

Advantages: Solvent-free (100% solids) | Easy roller applied application, low viscosity | Convenient, easy to mix packaging | Shorter construction periods | Excellent penetration and stabilization of the substrate | Reduction of adhesive consumption | Suitable for use on floors with radiant heating | Compatible with SikaBond® wood flooring adhesives, Sika® Level products range | Can be used below floating floors 

Packaging: 2.64 gal. kit

Technical Downloads

Product Data Sheet

Safety Data Sheet - Part A

Safety Data Sheet - Part B


Product Specifications

Fact Sheet