2024
Posted by Sika Expert
DIY Concrete Nameplate Project
These nameplates were quick and easy to make using Sikacryl® PowerSet Instant Concrete and SikaBond® Construction Adhesive.
Supplies & Tools
- Miter Saw
- Plastic Cups/Craft Sticks
- Silicone Letter Mold
- Caulk Gun
- Plastic Tubs
- Sand Paper
- Stain/Paint
- Sikacryl® PowerSet Instant Concrete
- Repair (1)
- SikaBond Construction Adhesive (1)
- Small Wooden Base
- *These supplies will yield at least 10-12 nameplates.
Step 1: Prepare Sikacryl® PowerSet Instant Concrete
Begin by removing the twist cap from the cartridge's top and cutting the plastic film open below the metal retaining clip. Place into a standard caulking gun, attach the static mixing nozzle, and begin dispensing until a uniform gray appearance and consistency is achieved.
Tip: Mix in small cups for more manageable batches.
Step 2: Dispense Into Letter Molds
Using the caulk gun, dispense Sikacryl® PowerSet Instant Concrete into the appropriate silicone letter molds based on the intended name.
Step 3: Sanding
The letters cured overnight and easily popped out of the silicone mold in 24 hours. Make sure to sand each letter for a smooth finish, wash, and let air dry.
Note: The silicone really slows down the curing process.
Step 4: Bonding
With a caulk gun dispense SikaBond Construction Adhesive onto a plate. Using craft sticks apply a small amount of construction adhesive to the bottom of each letter. Place them on the wooden base.
Note: The silicone really slows down the curing process.
Complete: DIY Concrete Nameplate Project