Product Data Sheet
Show all documents
SikaWall®-4020 Granite & Stone Finish

SikaWall®-4020 Granite & Stone Finish

Reflective stone finish reminiscent of classic granite or marble textures.

Factory-mixed, reflective stone finish consisting of colored aggregate and large black mica flakes in a 100% acrylic transparent binder. SikaWall Granite & Stone Finish provides a classic granite or marble-like textured finished appearance.

  • Incorporates light-reflecting mica chips; unique sparkling appearance
  • 100% Acrylic polymer chemistry; long-term durability and weather resistance
  • Simulated stone look; supports design freedom, reduces cost
  • Does not require a sealer; saves time and money
  • Weather resistant; repels water and resists wind-driven rain
Color Shown - Iridium
Product Data Sheet
Show all documents

Usage

SikaWall Granite & Stone Finish provides a weather-resistant and aesthetically pleasing surface color and texture for Sika Facades systems, poured concrete or unit masonry, conventional stucco, properly prepared insulating concrete forms, and interior veneer plaster or gypsum wallboard.  

Advantages

  • Incorporates light-reflecting mica chips; unique sparkling appearance
  • 100% Acrylic polymer chemistry; long-term durability and weather resistance
  • Simulated stone look; supports design freedom, reduces cost
  • Does not require a sealer; saves time and money
  • Weather resistant; repels water and resists wind-driven rain
Color Shown - Iridium

Packaging

5 gallon pail (19 liter pail)

Color

Available in 10 standard colors providing a classic granite or marble-like textured finished appearance.

Product Details

Product Information

Shelf Life

Two (2) years, when properly stored in original container.

Storage Conditions

  • Store in a cool, dry place protected from freezing, extreme heat and direct sun. Store at no less than 50°F (10°C).
  • Do not stack pallets.

Volatile organic compound (VOC) content

ASTM D3960 (based in part on EPA Method 24)        

<50g/l less water and exempt solvents.
Technical Information

Substrate

  • Sika Facades' Systems
  • Poured Concrete or Unit Masonry 
  • Conventional Stucco
  • Interior Veneer Plaster or Gypsum Wallboard

Tensile Adhesion Strength

METHODCRITERIA RESULT

ASTM C297, E2134

Minimum 15 psi

Pass

Application

Application Information

Ambient Air Temperature

  • Protect from temperatures less than 50°F (10°C) for a minimum of 24 hours or until dry. 
  • When temperatures less than 50°F (10°C) prevail, provide supplementary heat during installation and drying period for at least 24 hours after installation or until dry.
  • Do not apply in ambient temperature above 100°F (38°C) or surface temperature above 120°F (49°C).

Drying Time

Under average conditions [70°F (21°C), 50% Relative Humidity

  • Finish will be dry within 24 hours. Drying time is dependent on humidity, air temperature, sun exposure, surface conditions and finish thickness. Lower temperature, higher humidity and application in shaded areas will extend drying time.
  • Protect finish from rain or other precipitation and temperatures less than 50°F (10°C) for a minimum of 24 hours or until dry.
Consumption

Coverage

75-85 ft2 (7-7.9 m2) per pail

Coverage rates vary depending on the porosity of substrates and application techniques.

NOTE: Sufficient finish should be ordered to complete the entire project with one production run to alleviate potential batch color variations of the natural aggregate.

Documents