PAREX® 202 Armourwall Stucco Base Sanded

Parex 202 Armourwall Stucco Base Sanded is a fiber reinforced stucco base. It is a factory prepared mixture of portland cement, fibers, sand and proprietary ingredients. Parex 202 Armourwall Stucco Base Sanded can be installed 3/8-1/2 in. (9.5-12.7mm) thick in one application.

ADVANTAGES
Proprietary formulation; improved moisture resistance and low water absorption
Fiber reinforced; resists hydration/shrinkage cracking when properly cured
Needs only addition of water; easy to mix and use with consistent results
Sand is factory added, consistency in sand; quality assurance
Uses

Stucco Base over:

  • Concrete
  • Masonry
  • Metal lath

 

Lath is applied over:

  • Appropriate water resistive barrier overcontinuous sheathing
  • Expanded polystyrene (EPS). Per Parex Specification and Application Guide. (Not for Interior)
Coverage & Packaging

Coverage:

Depending on the condition of the substrate and thickness of application approximate coveragesper bag are:

  • at 3/8 in. (9.5mm): 20-25 ft2 (1.9-2.3 m2)
  • at 1/2 in. (12.7mm): 15-19 ft2 (1.4-1.8 m2)
  • Coverage may vary due to ambient temperature, surface temperature, surface porosity, mixing methods, application methods, amount of water, wall type and metal lath type. Coverage must be verified in the field using the same procedures and conditions that will be present at the project.

 

Packaging:

80 lb (36 kg) net weight in a moisture resistant bag.