PAREX® 210 Armourwall Stucco Base Concentrate
Parex 210 ArmourwallStucco Base Concentrate is a fiber reinforced stucco base concentrate. It is a factory prepared mixture of portland cement, fibers, and proprietary ingredients. Specified sand is added at the job site and can be installed 3/8-1/2 in. (9.5-12.7mm) thick in one application.
| ADVANTAGES |
|---|
| Superior weathering properties; long-term durability |
| Proprietary formulation; improved moisture resistance and low water absorption |
| Fiber reinforced; resists shrinkage cracking when properly cured |
| Needs only addition of water and sand; easy to mix and use with consistent results |
Uses
Stucco Base over:
- Concrete
- Masonry
- Metal lath
Lath is applied over:
- Appropriate water resistive barrier overcontinuous sheathing
- Expanded polystyrene (EPS). Per Parex Specification and Application Guide. (Not for Interior)
Coverage & Packaging
Coverage:
Depending on the condition of the substrate, thickness of application, and amount of sand added approximate coverages per bag are:
- at 3/8 in. (9.5mm): 75-90 ft2 (6.97-8.36 m2)
- at 1/2 in. (12.7mm): 60-72 ft2 (5.57-6.69 m2)
- Coverage may vary due to ambient temperature, surface temperature, surface porosity, mixing methods, application methods, amount of water, wall type and metal lath type. Coverage must be verified in the field using the same procedures and conditions that will be present at the project.
Packaging:
80 lb (36 kg) net weight in a moisture resistant bag.