Sika® Level SkimCoat
Sika® Level SkimCoat
Sika® Level SkimCoat is a one-component, easy to use and fast drying, cementitious skim mortar ideal for the repair or reprofiling of concrete, approved wood subfloors, gypsum based subfloors and correctly prepared ceramic or quarry tiles before the installation of Sika® Level products or final floor coverings. Can be installed as a true featheredge as well as filling voids and leveling defects up to 1/2" (0 - 13mm) in depth.
 
Where to Use: Use to reprofile substrates or subfloor surfaces from feather edge to 1/2” (13 mm) prior to applying Sika® Level products or floor finishes | Repair minor defects, holes, cracks and pre-fill non-moving joints and seams in concrete and wood substrates | Suitable for use with radiant heating systems. 
 
Advantages: Easy to prepare and quick to apply | Good adhesion to substrates, subfloors and stable adhesive residue | Rapid Setting; receives primers, levelers, adhesives and coverings without delay | Excellent standard of finish can be achieved to allow direct application of floor coverings | No MVER (Moisture Vapor Emission Rate) limits
 
Packaging: 10 lb. Bag
 
Technical Downloads

Product Data Sheet

Safety Data Sheet

Fact Sheet (English)

Fact Sheet (Spanish)

Sika® Level Rapid Patch
Sika® Level Rapid Patch

Sika® Level Rapid Patch is a one-component, polymer modified, easy to use and fast drying cementitious patching mortar ideal for the repair or re-profiling before the installation of Sika® Level products. Easily applied and with both high adhesion values and fine finishing qualities it can be used fill and level defects from 1/2 inch (0-13 mm) in depth

Where to Use: Interior use only | Patch minor surface defects, static cracks, holes, non-moving joints and seams, stable, non-bleeding adhesive residue | Concrete and cement based subfloors | OSB and plywood, ceramic and quarry tile

Advantages: Easy to prepare and quick to apply | Teather edge material | Repair new old floors | Good adhesion to substrates and stable adhesive residue | Excellent standard of finish can be achieved to allow direct application of coverings

Packaging: 25 lb. bag

Technical Downloads

Product Data Sheet

Safety Data Sheet

Safety Data Sheet - Spanish

Fact Sheet

Fact Sheet - Spanish

Sika® Level-125
Sika® Level-125

Sika® Level–125 is a one-component, durable and versatile cementitious underlayment for interior concrete and cementitious substrates. It can be applied manually or by pump to produce a self-smoothing, rapid-setting, flat and economical substrate prior to the application of a final floor finish. Typical application thickness is 1/8 to 2 inches* (3 to 50 mm). *in localized areas

Where to use: Interior floor leveling and smoothing applications where floor coverings are to follow, such as:    

Institutional - schools, colleges, hospitals, clinics, libraries, galleries, museums 

Commercial - offices, corridors, hallways, canteens, cafeterias, stores, hotels, restaurants 

Residential - domestic properties, condominiums and high rise construction

Advantages: Easy and quick to install | Zero VOC content and low odor | Self-leveling | Manual or pumpable application | Levels new and renovates old floors | Suitable for overcoating with non-moisture sensitive tile after 2-3 hours | Floor coverings (carpet, vinyl, PVC, rubber, engineered wood flooring) can be installed after 1-3 days | Excellent underlay for tiles, sheet products and wood floor bonding systems

Packaging: 50 lb. bag

Technical Downloads 

Product Data Sheet

Safety Data Sheet

Safety Data Sheet - Spanish

Fact Sheet

Fact Sheet - Spanish

Product Specification

Sika® Level-125
Sika® Level-225

Sika® Level-225 is a one-component, durable and versatile cementitious underlayment for interior concrete andcementitious substrates. It can be applied manually or by pump to produce a self-smoothing, rapid-setting, flat andeconomical substrate prior to the application of a final floor finish. Typical application thickness is 1/16” – 1.25” (1.5- 31 mm) up to 2.5’’ (64 mm.)

Where to use: Interior floor leveling and smoothing applications where floor coverings are to follow, such as:

Institutional - schools, colleges, hospitals, clinics, libraries, galleries, museums

Commercial - stores, offices, corridors, hallways, cafeterias, hotels, restaurants

Residential - domestic properties, condominiums and high rise construction 

Advantages: Superior workability for easy installations | Very smooth surface | Fast dry time | Zero VOC content and low odor | Highly fluid self-leveling | Manual or pumpable application | Levels new and renovates old floors | Excellent underlay for tiles, sheet products and wood floor bonding systems

Packaging: 55 lb. bag

Technical Downloads 

Product Data Sheet

Safety Data Sheet

Safety Data Sheet - Spanish

Fact Sheet

Fact Sheet - Spanish

Product Specification

Sika® Level-325
Sika® Level-325

Sika® Level-325 is a one-component, durable and versatile cementitious underlayment for interior and exterior concrete and cementitious substrates. It can be applied manually or by pump to produce a self-smoothing, rapid-setting and flat substrate prior to the application of a final floor finish. Typical application thickness is 1/8 to 3 inches* (3 to 76 mm). *in localized areas

Where to Use: Concrete | Cement substrates | Rapid drying cement screed systems | Gypsum substrates | OSB/Plywood only suitable for flexible coverings | Old substrates such as ceramic tiles and terrazzo | Old, water-resistant adhesive residues

Advantages: Self-leveling | For interior and exterior use | High strength | Low tension | Manual or pumpable application | Zero VOC content and low odor | Levels new and old floors | Can accept caster wheel loading if the thickness is greater than 1/8’’ | No MVER (Moisture Vapor Emission Rate) limits on well prepared concrete

Packaging: 55 lb. bag

Technical Downloads

Product Data Sheet

Safety Data Sheet - English

Safety Data Sheet - Spanish

Fact Sheet - English

Fact Sheet - Spanish

Metropolis Project - Case Study

Product Specification

Sika® Level-325
Sika® Level-425

Sika® Level-425 is a one-component, durable and versatile cementitious underlayment for interior concrete andcementitious substrates. It can be applied manually or by pump to produce a self-smoothing, rapid-setting, and flatsubstrate prior to the application of a final floor finish. Typical application thickness is 1/16” to 1/2” (1.5 to 12.7 mm),or up to 1” with aggregate.

Where to Use: Concrete | Cement substrates | Rapid drying cement screed systems | Gypsum substrates | OSB/Plywood only suitable for flexible coverings | Ceramic tiles , terrazzo or natural stone | Old, water-resistant adhesive residues

Advantages: Dust reduced | For interior use only | Self-leveling | High strength | Compatible with subfloor heating systems | Manual or pumpable applications | Very low shrinkage | Can accept caster wheel loading if the thickness is greater than 1/8’’ | Low porosity surface

Packaging: 55 lb. bag

Technical Downloads

Product Data Sheet

Safety Data Sheet

Safety Data Sheet - Spanish

Fact Sheet

Fact Sheet - Spanish

Product Specification

Sika® Level-325
Sika® Level-525 Rapid

Sika® Level-525 Rapid is a one-component, durable and versatile cementitious underlayment for interiorconcrete and cementitious substrates. It can be applied manually or by pump to produce a self-smoothing,rapid-setting, and flat substrate prior to the application of a final floor finish. Typical application thickness is1/16” to 1/2” (1.5 to 12.7 mm), or up to 1” with aggregate.

Where to Use: Concrete | Cement substrates | Rapid drying cement screed systems |  OSB/Plywood only suitable for flexible coverings | Ceramic tiles , terrazzo or natural stone | Old, water-resistant adhesive residues

Advantages: For interior use only | Rapid setting for fast job turnaround | Smooth, fluid and workable | Manual or pumpable applications | High strength | Suitable for application on subfloor heating systems | Can accept caster wheel loading if the thickness is greater than 1/8’’ | For forklift truck traffic, layer thickness at least 1/8”

Packaging: 55 lb. bag

Technical Downloads

Product Data Sheet

Safety Data Sheet

Safety Data Sheet - Spanish

Fact Sheet

Fact Sheet - Spanish

Product Specification

Sika® Level-325
Sika® Level-625

Sika® Level-625 is a one-component, durable and self-leveling topping for floors intentded to receive polishedconcrete surface. It can be applied manually or by pump to produce a self-smoothing and rapid-setting. Typicalapplication thickness is 1/8” to 1/2” (3 - 12.7 mm), or up to 2” with aggregate.

Where to Use: Sika® Level-625 can be used for polished concrete floors in restaurants, retail, schools, warehouses, lobbies,public buildings and many areas with moderate industrial loads | Concrete | Cement substrates | Gypsum substrates | Ceramic tiles and terrazzo | Old, water-resistant adhesive residues

Advantages: For interior and exterior use | Manual or pumpable application | Moisture resistant | Low shrinkage | Wear layer surface | Polishable | Can accept castor wheel loadings if the minimum thickness is 1/8"

Packaging: 55 lb. bag

Technical Downloads

Product Data Sheet

Safety Data Sheet

Safety Data Sheet - Spanish

Fact Sheet

Fact Sheet - Spanish

Product Specification

SikaQuick® 1000
SikaQuick® 1000

SikaQuick® 1000 is a 1-component, rapid hardening, early strength gaining, cementitious, patching material for concrete.

Where to Use: Use on grade, above, and below grade on concrete | Highway overlays and repairs | Structural repair material for concrete roadways, parking structures, bridges, dams and ramps | Full depth patching repairs | Economical patching material for horizontal repairs of concrete and mortar.

Advantages: Specially suited for hot weather applications when extended working time is required | Rapid hardening as defined by ASTM C-928 | Epoxy coatings can be applied as early as 6 hrs. Onsite testing is recommended for verification. Please consult coatings manufacturer for recommendations | Freeze/thaw resistant | Easy to use, labor-saving material | Not gypsum-based.High early strength | Open to foot traffic in 4 hours; to vehicle traffic in 6 hours (at 73°F) | Easily applied to clean, sound substrate

Packaging: 50 lb. Bag

Technical Downloads

Product Data Sheet

Safety Data Sheet

Product Specification

Fact Sheet

Training Presentation

G&H Building, MS (Case Study)

Mellville Towers (Case Study)

The Cotton Bowl (Cast Study)