Product Data Sheet
Show all documents
SikaGrout® Aid Plus

SikaGrout® Aid Plus

Aluminum-free, anti-bleed, shrinkage compensating, fluidizing grout aid

SikaGrout® Aid Plus is a balanced blend of fluidizing, water reducing, shrinkage compensating and bleed reducing admixture for portland-cement grouts.

  • Help in producing high quality grout with a job site mix.
  • Pre-packed aggregate cavities.
Product Data Sheet
Show all documents

Usage

  • Use for horizontal and vertical prestressed tendons.
  • Pre-packed aggregate cavities.
 

Advantages

  • Help in producing high quality grout with a job site mix.
  • Pre-packed aggregate cavities.

Packaging

40 lb (18.1 kg) bag

Color

Gray powder

Product Details

Product Information

Shelf Life

6 months from date of production if stored properly in original, unopened and undamaged sealed packaging

Storage Conditions

Store dry at 40–95 °F (4–35 °C)

Protect from moisture. If damp, discard material.

Application

Application Information

Mixing Ratio

3–4 % of SikaGrout® Aid Plus per 100 lb. of cementitious material.

Pot Life

SikaGrout® Aid Plus shall be placed within 60 minutes of mixing.

 
Application steps

MIXING

Mix Design

  • The following typical mix design shall only serve as a guide.
  • Pretesting of the admixture with the local cement is a must.
  • Product performance shall be established and monitored to ensure compliance with the requirements.
  • Variance in cement can produce a shift in expected results.

  

Mixing

  • Mixing should be in accordance with the PTI Guidelines as stated in section 5.6.1 (Second edition).
  • The following order should be followed for adding the ingredients: Water, Approx. 50 % cement, SikaGrout® Aid Plus, and remaining cement.
  • The water to powder ratio should be targeted around 0.28–0.30.
  • Mixing shall be of such duration so as to obtain a uniform homogenous mixture without excessive temperature increase. Typical mixing time range from 4–6 minutes.
  • Optimum performance of the admixture in a grout shall be obtained by using high speed drill with a 2,000–2,500 rpm drill a or colloidal mixer like ChemGrout CG 600.
  • Method of mixing may significantly effect the grout properties, particularly flow.

APPLICATION

  • All pumps and hose fittings should be absolutely watertight to prevent loss of water and subsequent clogging.
  • Be sure your batches are limited in size so that placement can be completed approximately in one hour.

Documents