SikaLatex® A 100

SikaLatex® A 100 contains acrylic-polymer latex technology

12 months when properly stored

Store in unopened containers in a clean, dry area. Keep from freezing.

30%

For Best Performance

• Do not use SikaLatex® A 100 below 40° F (4° C) or when temperatures below 40° F (4° C) will occur within 48 hours after application.
• Do not add any other admixtures to SikaLatex® A 100 or mixing liquids
• Do not use SikaLatex® A 100 if it becomes curdled in the container.
• Protect from freezing.
• Do not use it with grouts.
• For professional use only; not for sale to or use by the general public.
• Make certain the most current versions of the product data sheet and SDS are being used.
• Proper application is the responsibility of the user. Field visits by Sika personnel are for the purpose of making technical recommendations only and not for supervising or providing quality control on the jobsite.

Refer to technical data guides for Sikafloor® QuartzTop-115 for proper surface preparation.

1. SikaLatex® A 100 is a dispersion and must always be stirred or shaken before use. Stir product to a uniform blend when combined with water.
2. When diluting SikaLatex® A 100, always premix SikaLatex® A 100 and water separately. Next, slowly blend the powder ingredients into the resulting mixing liquid to reach the desired consistency.
3. Use the least amount of SikaLatex® A 100 and water for the job at hand. Overmixing will entrap air and must be avoided.
4. The working life of the wetted mix depends upon the mix design. See the product data guide for Sikafloor® QuartzTop-115.

1. Keep all cement mixes and SikaLatex® A 100 dilutions from freezing.
2. Maintain the mix temperature in the 60 to 80° F (16 to 27° C) range. The minimum temperature for application is 40° F (4° C).

For Concrete Patching, Overlays And Repairs With Sikafloor® QuartzTop-115

1. Premix SikaLatex® A 100 with water at a 1 to 1 ratio.
2. For specific mix application guidelines see theSikafloor® QuartzTop-115 data guides.