Product Data Sheet
Show all documents

Sikadur® Injection Gel

High-modulus, high-strength, structural, non-abrasive, smooth epoxy paste adhesive

Sikadur® Injection Gel, Standard Set is a 2-component, 100 % solids, moisture-tolerant, high-modulus, highstrength, structural epoxy. When mixed it gives a smooth, non-abrasive, paste adhesive. It conforms to the current ASTM C-881, Types I and IV, Grade-3, Class-C and AASHTO M-235 specifications.

  • Unique, non-abrasive texture permits application with automated pressure-injection equipment.
  • Tolerant of moisture before, during, and after cure.
  • High-modulus, high-strength, structural-paste adhesive.
  • Excellent adhesion to masonry, concrete, wood, steel and most structural materials.
  • Paste consistency ideal for vertical and overhead grouting of cracks.
  • Convenient easy mix ratio A:B = 1:1 by volume.
  • Excellent lubricity for deep penetration.
  • Sikadur Injection Gel fast set is approved for short term loads only. Consult a design professional prior to use.
Product Data Sheet
Show all documents

Usage

  • Structural crack repairs not exceeding 1/4 in. (6 mm) width.
  • Mechanical grouting. . . bolts, dowels, pins, machine and ‘robotic’ base plates, bearing pads, etc.
  • Waterproofing tunnels, cable vaults, tanks, basements, etc.
  • Re-anchoring of veneer masonry. Consult a design professional prior to use.
  • Wood-truss repairs.
  • Preventive maintenance - grout large cracks on new or existing structures to seal off reinforcing steel from the elements of corrosion.
  • Anchor grouting . . . bolts, dowels, pins and special fasteners. Consult a design professional prior to use.
  • As a pick-proof sealant around windows, doors, lock-ups, etc. inside correctional facilities.
 

Advantages

  • Unique, non-abrasive texture permits application with automated pressure-injection equipment.
  • Tolerant of moisture before, during, and after cure.
  • High-modulus, high-strength, structural-paste adhesive.
  • Excellent adhesion to masonry, concrete, wood, steel and most structural materials.
  • Paste consistency ideal for vertical and overhead grouting of cracks.
  • Convenient easy mix ratio A:B = 1:1 by volume.
  • Excellent lubricity for deep penetration.
  • Sikadur Injection Gel fast set is approved for short term loads only. Consult a design professional prior to use.

Packaging

4 gal. (15 L) units

Color

Gray

Product Details

Product Information

Shelf Life

24 months in original, unopened container

Storage Conditions

Store dry at 40–95 °F (4–35 °C).

Condition material to 65–75 °F (18–24 °C) before using.
Technical Information

Compressive Strength

40 °F* (4 °C)73 °F* (23 °C)90 °F* (32 °C)
4 hours--

300 psi

(2.1 MPa)

8 hours-

300 psi

(2.1 MPa)

6,500 psi

(44.8 MPa)

16 hours

100 psi

(0.7 MPa)

7,500 psi

(51.7 MPa)

7,000 psi

(48.3 MPa)

1 day

1,400 psi

(9.6 MPa)

8,000 psi

(55.1 MPa)

9,500 psi

(65.5 MPa)

3 days

7,600 psi

(52.4 MPa)

8,500 psi

(58.7 MPa)

10,000 psi

(68.9 MPa)

7 days

9,000 psi

(62.1 MPa)

9,000 psi

(62.1 MPa)

10,000 psi

(68.9 MPa)

14 days

10,000 psi

(68.9 MPa)

10,000 psi

(68.9 MPa)

10,000 psi

(68.9 MPa)

28 days

10,000 psi

(68.9 MPa)

10,000 psi

(68.9 MPa)

10,000 psi

(68.9 MPa)

*Cured and tested at the temperatures indicated.

Flexural Strength

6,700 psi (46.2 MPa) min. (14 days)

(ASTM D-790)

Modulus of Elasticity in Flexure

7,5*105 psi (5.175 MPa) min. (14 days)

(ASTM D-790)

Tensile Strength

4,300 psi (29,7 MPa) min. (14 days)(ASTM D-638)

Tensile Adhesion Strength

Hardened concrete to hardened concrete

2 day

(dry cure)

Bond Strength

3,000 psi

(20.6 MPa)

2 day

(moist cure)

Bond Strength

2,500 psi

(17.2 MPa)

14 day

(moist cure)

Bond Strength

2,600 psi

(17.9 MPa)

   

Hardened concrete to hardened concrete

2 day

(dry cure)

Bond Strength

3,300 psi

(22.7 MPa)

14 day

(moist cure)

Bond Strength

2,600 psi

(17.9 MPa)

Application

Application Information

Mixing Ratio

Component ‘A’ : Component ‘B’ = 1:1 by volume.

Pot Life

Approx. 30 min. (60 grams mass.)

 
Consumption

Coverage

1 gal. yields 231 cu. in. of epoxy paste adhesive.
Application steps

SUBSTRATE PREPARATION

Surface must be clean and sound. It may be dry or damp, but free of standing water. Remove dust, laitance, grease, curing compounds, impregnations, waxes and any other contaminants.
Preparation Work: Concrete - Should be cleaned and prepared to achieve a laitance and contaminant free, open textured surface by blastcleaning or equivalent mechanical means.
Steel - Should be cleaned and prepared thoroughly by blastcleaning.

MIXING

Sikadur® Injection Gel, Standard Set is specially designed and formulated to be mixed and applied with automated pressure-injection equipment. Follow the recommendations and directions supplied by the equipment manufacturer.
Pre-mix each component. Proportion equal parts by volume of Component ‘B’ and Component ‘A’ into a clean pail. Mix thoroughly for 3 minutes with Sika paddle on low-speed (400–600 rpm) drill until uniform in color. Mix only that quantity that can be applied within its pot life.

Documents