SikaLiquid® Weld

12 months from date of production if stored properly in original, unopened and undamaged sealed packaging

Store in cool, frost-free conditions with temperatures

between 50 °F to 90 °F (10 °C to 32 °C).
Condition product to between 50 °F to 90 °F (10 °C to 32 °C).

1,000 cps

1 hour

150-300 ft² (14-27.9 m²) per can

(Coverage figures do not include allowance for surface profile and porosity or material waste)

• Prior to installation, stir SikaLiquid® Weld before use for consistent dispersion.
• Apply Undiluted.

• Apply SikaLiquid® Weld uniformly over the substrate using a stiff brush, broom, roller or spray to form a continuous film.
• Reapply SikaLiquid® Weld that are not covered entirely.
• Allow film to dry for approximately 1 hour prior to application of mortars, concrete or stucco.
• Dry time can be affected by temperature and humidity, check to make sure product is dry to the touch before topping.
• Extremely porous substrates may require 2 coats of SikaLiquid® Weld.
• Protect newly applied SikaLiquid® Weld from dust, dirt, debris and moisture.