Specialty Solutions

• Dimensionally stable and pressureresistant. Defined amount of adhesive consumption. Low weight for transport.
• No limitations on maximum wood length. Bonds unlimited width solid and engineered planks directly to concrete substrates.
• 500% Elongation
• Fast curing for early green strength and superior holding power
• Extremely easy to install
• Independently tested to – IIC 59 and STC 60
• Independently tested to – FIIC 59 and FSTC 59
• Structurally bonds wood flooring to the subfloor
• Eliminates the extensive labor of installing cork underlayments
• No need for sleepers and plywood over concrete- and gypsum-based subfloors
• Innovative walk-on work method
• Can reduce overall installation costs up to 30%
• Suitable for bonding wood floors directly onto old ceramic tiles
• Reduces stress on the substrate

• Low odor and low VOC formulation is safe to use in occupied indoor spaces
• Strong and versatile adhesion that permanently bonds together nearly any material
• High solids, non-shrinking formulation provides desired coverage without cracking or losing bond over time
• Provides a tenacious bond that is stronger than many substrates it joins together, up to 3 times the strength of conventional adhesives
• Provides permanent overnight bond for faster project completion
• Long open time offers flexibility in repositioning, user friendly
• Can be applied to frozen, frost-free lumber for on-site versatility
• Broad service temperature range is suitable for use in hot and cold environments

• Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals and wood
• Fast cure rate
• Waterproof and water immersible after cure
• Good weathering resistance
• Non-corrosive
• Can be painted over with water, oil, and rubber-based paints (preliminary tests are recommended)
• High durability and flexible
• Can be used to fill in gaps, gray in color

• Ultimate bond strength
• Freeze-thaw stable
• Passes type II water resistance
• Quick drying
• Easy clean up when wet
• Environmentally friendly
• Superior coverage
• Easy application
• Non-flammable
• Low odor
• Non-toxic

• Functional and easy to use for both the professional flooring installer and the “do it yourselfer”
• Hollow spot or void beneath the flooring is completely filled with the SikaBond® Engineered Wood Floor Repair Adhesive, truly repairing the problem! (epoxy repair kits only tack down a small section of the problem area)
• Drill bit and applicator tips are much smaller in diameter than conventional repair kits, creating a smaller hole which is easily hidden with wood putty
• No need to weigh down the repaired area
• Cost per repair is a fraction of the cost of epoxy
• Floor can be walked on immediately after the repair (no set up time is required!)

· Ideal for SikaBond® urethane adhesives even after curing  

· Does not leave ghosting on wood floor finish

· Leaves no residue

· Low odor

· Fast drying

• Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin
• Fast cure rate
• Good weathering and water resistance
• Non-corrosive
• Can be painted over with water, oil, and rubber-based paints. (Preliminary tests recommended).
• High durability
• Can be used in tamper resistant joints.