Product Data Sheet Show all documents

SS Waterstop

WESTEC STAINLESS STEEL CHEMICALLY RESISTANT WATERSTOP

316 Stainless Steel Waterstop for joint waterproofing.

Embedded in concrete, across and/or along the joint, waterstops form a watertight diaphragm that prevents the passage of liquid through the joint. Suitable for high temperature applications and contact with a wide range of chemicals including oils, fuels, acids, bases, and numerous solvents.
Product Data Sheet Show all documents

Usage

High temperature environments that exceed 250°F or for the most severe chemical applications  

Advantages

Embedded in concrete, across and/or along the joint, waterstops form a watertight diaphragm that prevents the passage of liquid through the joint. Suitable for high temperature applications and contact with a wide range of chemicals including oils, fuels, acids, bases, and numerous solvents.

Packaging

Various profiles, provided in 10 ft lengths

Product Details

Product Information

Shelf Life

N/A

Storage Conditions

N/A
Technical Information

Tensile Strength

75000 psi

(ASTM A370)

Elongation

40% Duct Elongation in 2" min.

(ASTM A370)

Tear Strength

30000 psi Yield Strength

(ASTM A370)

Chemical Resistance

Resistant to a wide range of chemicals. Please refer to the Westec® Chemical Resistance Chart available at usa.sika.com for commonly used chemicals or contact the waterproofing engineering department for any chemicals not shown.

Maximum Water Pressure

Varies depending on profile selection

Ambient Maximum Temperature of Liquids

> 250°F

 

Application

Application steps

APPLICATION INSTRUCTIONS

Documents