SikaFiber® Enduro® Prime
Macro-Synthetic Fiber
SikaFiber® Enduro® Prime is macro synthetic reinforcing fiber complying with ASTM C1116, Type III. SikaFiber® Enduro® Prime is 100% virgin copolymer fiber deisgned to provide a uniform three dimensional reinforcement system in the concrete mix. Specifically engineered and manufactured in an ISO 9001 certified manufacturing facility. SikaFiber® Enduro® Prime previously Enduro Prime.
- Widely DOT approved - contact regional sale manager for state-by-state acceptance.
- Geometrically engineered to resist matrix pullout.
- Cost-effective, three-dimensional reinforcement alternative to secondary wire mesh or rebar, and steel fibers.
- Can be utilized to reduce rebar or wire mesh.
- Increased safety on job site; remove lifting of reinforcement, bending to tie, and tripping hazard.
- Reduction in construction time. No cutting, placing, tying, and chairing required
- Reducing embodied carbon through the replacement of convention steel reinforcement with synthetic structural fibers.
- Increase ductility, flexural toughness and post first crack reinforement of concrete.
- Increased durability due to high chemical resistance and corrosion free.
- Inhibits plastic shrinkage and settlement cracking.
- Improves impact, shatter, and abrasion resistance of concrete.
- Reduces permeability.
- Pumpable reinforcement with reduced wear on pumps and hoses.
- Toss in degradable bags make it easy to batch.