Product Data Sheet
Show all documents

Sika® Fibermesh® HP

MICRO-SYNTHETIC MONOFILAMENT FIBER

Sika® Fibermesh® HP, micro-reinforcement system for concrete is made up of 100 percent virgin homopolymer polypropylene ultra type multifilament (monofilament) micro fibers.  Specifically engineered and manufactured in an ISO 9001 certified manufacturing facility for use as concrete reinforcement.  Previously named Fibermesh 150HP and SikaFiber HP.

  • Lower dosage rates for equivalent performance
  • Reduces plastic shrinkage cracking
  • Reduces plastic settlement cracking
  • Improves impact, shatter and abrasion resistenance
  • Enhances durability
  • Promotes uniform bleed and reduces bleed water
  • Inhibits and control the formation of intrinsic cracking in the concrete
  • Increases cohesion and reduces segragation
  • Reinforces against abrasion
  • Helps reduce cracking due to freeze / thaw
Product Data Sheet
Show all documents

Usage

Sika® Fibermesh® HP is an all ultra type of micro fiber that acts mechanically by supporty the aggregate within the concrete with multidimensional fiber network and helps develop a uniform bleed in the concrete system.   The fiber does not affect the curing process chemically and it does not absorb water.  The Sika® Fibermesh® HP can be used in all types of concrete applications to control plastic shrinkage and settlement cracking.   Typical applications include:
  • Slabs on ground
  • Residential applications: sidewalks, driveways, decks, curbs
  • Stamped / Stained / Polished finishes
  • Precast elements
  • Overlays / Toppings
  • Stucco
  • Shotcrete
  • Roads / Pavements / Bridge decks
  • Self compacting concrete
 

Advantages

  • Lower dosage rates for equivalent performance
  • Reduces plastic shrinkage cracking
  • Reduces plastic settlement cracking
  • Improves impact, shatter and abrasion resistenance
  • Enhances durability
  • Promotes uniform bleed and reduces bleed water
  • Inhibits and control the formation of intrinsic cracking in the concrete
  • Increases cohesion and reduces segragation
  • Reinforces against abrasion
  • Helps reduce cracking due to freeze / thaw

Packaging

Sika® Fibermesh® HP are available in a variety of packaging options.  The 0.5 lb bag is a standard size.  The bags are packed into cartons and palletized.

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

Lowers carbon footprint through the removal of rebar or wire mesh reinforcing which has a higher GWP.

A Type III Product-Specific Environmental Product Declaration (EPD) and a Manufacturer Inventory are available for Sika® Fibermesh® HP.  For further information, please visit: https://usa.sika.com/en/sustainability.html

APPROVALS / STANDARDS

  • Complies with European Standard EN 14889-2:2006 Fibres for Concrete Part 2: Class Ia
  • Complies with ASTM C1116/C1116M, Type III fiber reinforced concrete and therefore ASTM D7508.
Product Information

Fiber Volume Content

105,000,000 fibers / lb

Shelf Life

When stored in dry conditions, shelf life is 5 years.

Storage Conditions

Sika® Fibermesh® HP should be stored in a dry warehouse.  Protect product from the rain and direct sunlight.

Fiber Type

Monofilament micro synthetic fiber

Dimensions

  • Length:  Graded 1/4 & 1/2 inch (6 & 12 mm)
  • Diameter:  0.0012 inch (0.03 mm)
  • Aspect Ratio: 200 to 400

Melting Point

324 oF (162 oC)
Technical Information

Resistance to Alkalinity

Excellent

Application

Consumption

Recommended Dosage

The dosage of Sika® Fibermesh® HP will vary according to the type of application and performance requirements.   Standard recommended dosasge rate of Sika® Fibermesh® HP is 0.5 lb/ cu yd (0.3 kg/m3) of concrete.  Dosages outside the recommended dosage can be used to meet project specific requirements.  If this is the case please contact your Sika representative for technical support.

Documents