Product Data Sheet Show all documents

Sikafloor®-150 Epoxy Patching Paste

Epoxy Patching Paste

Sikafloor®-150 Epoxy Patching Paste is a two component, high solids, high modulus, high strength, epoxy patching gel. When mixed, it gives a smooth, non-abrasive, paste adhesive.

  • High Solids
  • Low Odor
  • High-modulus, high-strength, patching paste
  • Excellent adhesion to masonry, concrete, wood, steel, and most structural materials.
  • Paste consistency ideal for vertical and overhead applications.
  • Easy to mix
  • Low Odor
Product Data Sheet Show all documents

Usage

Fill static cracks, holes and divots  

Advantages

  • High Solids
  • Low Odor
  • High-modulus, high-strength, patching paste
  • Excellent adhesion to masonry, concrete, wood, steel, and most structural materials.
  • Paste consistency ideal for vertical and overhead applications.
  • Easy to mix
  • Low Odor

Packaging

 Component A:

1 US gal (3.78L)

 Component B:1 US gal (3.78L)
 Component A+B: 2 US gal Kit

Color

Gray

Product Details

Product Information

Shelf Life

24 Months  in original, unopened container.

Storage Conditions

The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between 40 to 95 °F(4 to 35 °C ).

Volatile organic compound (VOC) content

13 g/l

A+B Combined

 
Technical Information

Compressive Strength

PropertiesTime40°F (5°C) 73°F (23°C)90°F (32°C)
ASTM D6952 hours

4,400 Psi

(30.3 MPa)

7,700 Psi

(53.1 MPa)

         --

                         "

4 hours

9,300 Psi

(64.1 MPa)

10,900 Psi

(75.1 MPa)

        --

                          "1 day          --

12,000 Psi

(82.7 MPa)

11,500 Psi

(79.3 MPa)

                          "3 days           --

12,900 Psi

(82.7 MPa)

11,500 Psi

(79.3 MPa)

Tensile Adhesion Strength

>400 psi (2.4 MPa) - Concrete Failure

ASTM D4541

at 73°F (23°C) and 50% R.H

Application

Application Information

Mixing Ratio

1:1 by volume Smooth, non-sag paste

Pot Life

Material

Temperature

Time
+73°F (23°C)~ 5 -10 minutes

Cure Time

Substrate

Temperatur

Gel TimeFull cure
90° F  (32° C)5 minutes4 hours
75° F  (23° C)10 minutes4 hours
60° F  (15° C)15 minutes12 hours
40° F   (4° C)35 minutes24 hours
Application steps

MIXING

MIxing Ratio: 1:1 by volume.

Pre-mix each component, proportion equal parts by volume

of Component ‘B’ and Component ‘A’ into a clean pail.

Mix thoroughly for 3 minutes with a jiffy mixing blade on

low-speed (400-600 rpm) drill until uniform in color.

Mix only that quantity that can be used within its pot life.

APPLICATION

Apply with spackle knife and feather edge.

 

Documents