Product Data Sheet Safety Data Sheet Show all documents
Sikafloor®-51 P Pronto

Sikafloor®-51 P Pronto

(formerly MTop SRS 51P)

MEDIUM VISCOSITY METHYL-METHACRYLATE PRIMER FOR POROUS CONCRETE

Sikafloor®-51 P Pronto is a methyl methacrylate (MMA) primer for use within the Sikafloor® Pronto flooring systems. Sikafloor®-51 P Pronto is a solvent-free, 2-component, 100% reactive, medium viscosity primer. Sikafloor®-51 P Pronto has superior adhesion to concrete and is ideal as a primer or sealer for porous concrete surfaces. Sikafloor®-51 P Pronto should completely seal the concrete surface resulting in a uniform satin finish. Sikafloor®-101 AC Pronto accelerator should be utilized with Sikafloor®-51 P Pronto at temperatures below 32°F (0°C). Sikafloor®-102 AP Pronto bond promoter can be utilized with Sikafloor®-51 P Pronto as a suitable primer for tile substrate applications.

  • Fully cures in one hour, reducing downtime for  a quick return to service
  • Great adhesion to concrete that is ideal for porous concrete surfaces
  • NSF registered for incidental food contact (R2)
  • Can be applied down to -20° F (-29° C) to meet a wide range of application and timing requirements.
  • Keep stored in a cool, dry environment and out of direct sunlight.
  • When used with Sikafloor®-102 AP Pronto, it is the ideal primer for tile applications.
 
Product Data Sheet Safety Data Sheet Show all documents

Usage

Used as a primer within the following Sikafloor® Pronto flooring systems:
  • Sikafloor® Pronto CBT
  • Sikafloor® Pronto CBP-CF
  • Sikafloor® Pronto CBP-CQ
  • Sikafloor® Pronto 1817 PC
  • Sikafloor® Pronto RB-1820 CP
  • Sikafloor® Pronto RB-1823 CQ
  • Sikafloor® Pronto RB-1841 CF
  • Sikafloor® Pronto RB-1843 CQ
  • Sikafloor® Pronto RB-1845 CP
  • Sikafloor® Pronto RB-1851 CF
  • Sikafloor® Pronto RB-1853 CQ
  • Sikafloor® Pronto RB-1855 CP

Advantages

  • Fully cures in one hour, reducing downtime for  a quick return to service
  • Great adhesion to concrete that is ideal for porous concrete surfaces
  • NSF registered for incidental food contact (R2)
  • Can be applied down to -20° F (-29° C) to meet a wide range of application and timing requirements.
  • Keep stored in a cool, dry environment and out of direct sunlight.
  • When used with Sikafloor®-102 AP Pronto, it is the ideal primer for tile applications.
 

Packaging

4.5 gallon (17 L) pail
47.5 gallon (180 L) drum

Color

Clear

Product Details

Product Information

Active content

Percentage reactive resin: 100%

Shelf Life

2 years when properly stored

Storage Conditions

Keep stored in cool, dry environment, and out of direct sunlight

Solid content by volume

100%

Viscosity

220 – 330 cps

(ASTM D2393)
Technical Information

Shore D Hardness

83

(ASTM D2240)

Tensile Strength

4,250 psi

(ASTM D638)

Water Absorption

<0.1%

(ASTM D570) % per 24 hours

Application

Consumption

Coverage

All coverage rates are approximate. Coverage rates will vary with the desired texture and porosity of the substrate. Typically, a batch of Sikafloor®-51 P Pronto will achieve a coverage rate of 100 ft2 (9.3 m2).
Application steps

APPLICATION INSTRUCTIONS

For Best Performance

  • Not for use at application temperatures over 90° F (32° C).
  • Not for use in areas exposed to strong solvents (consult Sika Technical Service).
  • Install at the recommended thickness to ensure proper curing and leveling.
  • Each application must be completely cured prior to the next application.
  • Protect or remove food items prior to application to avoid any possible contamination.
  • Use clean pails when mixing to avoid the possibility of improper curing.
  • Proper airflow is critical to curing MMA  materials. The use of fans is mandatory where airflow is restricted.
  • Apply a bond test every 500 – 1,000 ft2  (46.5 – 93 m2) prior to floor installation.
  • Sika flooring specialists are available to assist you in the selection of the proper flooring system. Visit usa.sika.com for in-house and field technical assistance.
  • Make certain the most current versions of the product data sheet and SDS are being used; visit usa.sika.com to verify the most current versions.
  • Proper application is the responsibility of the user.
  • Field visits by Sika personnel are for the purpose of making technical recommendations only and not for supervising or providing quality control on the job site.

APPLICATION

Please refer to individual flooring system data sheets and Sikafloor Pronto Mixing Chart for batch size and application instructions. When coating over epoxy, Sikafloor®-103 IN Pronto must be used with Sikafloor®-51 P Pronto to ensure proper curing.

 

Every Sikafloor® Pronto flooring system is a multiple-component system that utilizes a methyl-methacrylate (MMA) resin. It is critical that the instructions listed in the Safety Data Sheet and on the product label for every component of the system be read, understood, and followed. MMA resins are flammable liquids in their uncured state. Smoking, open flames, or sparks should not be permitted during the handling of the product. Explosion-safe ventilation must be used during the application to minimize vapor collection in the installation area and to improve overall air quality for the crew. All foodstuffs must be removed during installation of the flooring system.

Documents