Sika® Ucrete® TCCS
(formerly Ucrete® TCCS)
Heavy-duty, color-stable, encapsulation resin for enhanced aesthetics
0.0 (0)
Sika® Ucrete® TCCS is a three-part, heavy-duty, fast-cure encapsulation resin. It provides a highly aesthetic, color-stable, matt sheen finish for the Sika® Ucrete® CS range of flooring systems.
- Expert installation by fully trained applicators
- Very good resistance to staining from a specific range of chemicals and food industry products
- Very good resistance to UV exposure
- Good yellowing resistance provides long-term color stability
- Fast curing
- Non-tainting after curing
- Good temperature resistance
Usage
Sika® Ucrete® TCCS is used as a top coat for Sika® Ucrete® flooring systems. Please note:- The Product may only be used by experienced professionals.
Advantages
- Expert installation by fully trained applicators
- Very good resistance to staining from a specific range of chemicals and food industry products
- Very good resistance to UV exposure
- Good yellowing resistance provides long-term color stability
- Fast curing
- Non-tainting after curing
- Good temperature resistance
Packaging
7.35 kg
Refer to the current price list for available packaging variations.
Color
| Cured color | Grey, Light Grey, Cream, Yellow, Bright Yellow, Green, Light Green, Green/ Brown, Red, Orange, Blue, Light Blue. |
Product Details
APPROVALS / STANDARDS
-
Halal Certification Europe (HCE), Sika® Ucrete®, WHFC, Certificate No. 21453-2/1/1/Y1
-
Food and Beverage Facilities Suitability, Sika® Ucrete®, HACCP, Test Report No. I-PE-769-SA-2-RG-06b
-
Indoor Air Comfort Gold EN 16516, Sika® Ucrete®, eurofins, Certificate No. IACG-321-01-01-2023
Chemical Base
Acrylic
Shelf Life
Always refer to the best-before date of the individual packaging.
Storage Conditions
The Product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between 41 °F and 86 °F. Always refer to the packaging.
Refer to the current Safety Data Sheet for information on safe handling and storage.
Tensile Adhesion Strength
| >290 psi (concrete failure) | (EN 1542) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Application
Product Temperature
| Maximum | 71.6 °F |
| Minimum | 53.6 °F |
Ambient Air Temperature
| Maximum | 71.6 °F |
| Minimum | 53.6 °F |
Dew Point
Beware of condensation. The substrate and uncured applied product must be at least 37.4 °F above the dew point to reduce the risk of condensation or blooming on the surface of the applied product. Low temperatures and high humidity conditions increase the probability of blooming.
Substrate Temperature
| Maximum | 71.6 °F |
| Minimum | 50 °F |
Cure Time
The floor can be returned to service after 2 hours.
Note: Times are approximate and will be affected by changing ambient and substrate conditions.
Waiting / Recoat Times
Minimum | 2–3 hours |
Maximum | 48 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Coverage
Approximately 150 ft2 / kit @ 10-11 mils
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the Product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.
APPLICATION
Application must be undertaken by a fully trained Sika® Ucrete® applicator.