Sikafloor Polyurethane Cement Systems

Hygienic, heavy-duty polyurethane floor screed with very good slip resistance

Sika® Ucrete® UD 200 SR is a heavy-duty resin floor with very good resistance to aggressive chemicals, heavy impact and temperatures up to 302 °F. 

• Expert installation by fully trained and licensed applicators
• Resistant to bacterial or mold growth 
• Suitable for application on to 7-day-old concrete and 3-day-old polymer screed 
• Can be accelerated with Sika® Ucrete® Accelerator for fast installation within a 12-hour window 
• Very good resistance to specific chemicals 
• Very good mechanical resistance

SELF-LEVELING BROADCAST CEMENTITIOUS URETHANE SLURRY

Sika® Ucrete® HS22 NA is a self-leveling, solid color, three component, cementitious urethane mortar designed to provide excellent resistance to abrasion, impact, and chemical attack. Sika® Ucrete® HS22 NA is broadcast with dried quartz sand and sealed with Sika® Ucrete® TC31 NA to produce a solid color finish. Can be broadcasted with colored quartz aggregate and sealed with Sikafloor resinous flooring products for a decorative finish. The system is typically installed at 3/16" to 1/4" (188 to 250 mils) thickness.

• Can be applied on green concrete, typically 7-10 days. Full 28 days cure time is not necessary.
• Can be applied over partially cured concrete substrates (>4% mass (pbw-part by weight)) as measured with Tramex® CME/CMExpert type concrete moisture meter (surface moisture).
• Can be applied to concrete substrates where <100% relative humidity is measured as per ASTM F2170.

SELF LEVELING POLYURETHANE CEMENTITIOUS SLURRY FOR GENERAL INDUSTRIAL AND COMMERCIAL USE

Sika® Ucrete® HS24 NA is a phthalate-free, water dispersed polyurethane based/cement and aggregate screed, applicable at thicknesses ranging from 80 to 160 mils (2 to 4 mm). It is designed to be installed as a self leveling floor topping that provides an easy-to-clean, smooth surface with slip resistance and is typically used for general, industrial applications. Sika® Ucrete® HS24 NA represents superior polyurethane/cement technology, combining easier application and improved performance.

• Can be applied on green concrete, typically 7 -10 days. Full 28 days cure time is not necessary.
• Can be applied over partially cured concrete substrates (>4% mass (pbw-part by weight)) as measured with Tramex® CME/CMExpert type concrete moisture meter (surface moisture).
• Can be applied to concrete substrates where <100% relative humidity is measured as per ASTM F2170.

Sika® Ucrete® TC31 NA is a pigmented, matte finish
coating based on the unique Sika® Ucrete® water
dispersed polyurethane/cement and aggregate
technology. Typically installed as a primer and topcoat
for Sika® Ucrete® systems. It can also be used as a stand
alone coating on concrete surfaces. It provides an
economical soution that has excellent chemical
resistance properties and very good durability against
abrasion and mechanical damage. System can be
installed at 15 to 20 mils (0.4 to 0.5 mm) per coat