Sikagard® 215

24 Months in original unopened container under proper storage

Store dry between 50 °F (10 °C) and 90 °F (32 °C)

Please consult Sikafloor Technical Services.

Mix Ratio: 2.5 : 1

Note: Times are approximate and will be affected by changing ambient conditions.

Before applying second coat Sikagard 215 allow:

160–200 ft² / US gal (3.9–4.9 m² / L) at 8–10 mils (0.20–0.25 mm) wet film thickness (w.f.t.).

Mixing Ratio - 2.5 : 1 by volume Use Sikafloor 217 Component B Hardener     

                               
For bulk packaging, each component must be pre-mixed separately to ensure product uniformity.
Pre-mix each component separately. Empty Component B (Hardener) in the correct mix ratio (see table below) into Component A (Resin). Mix the combined components for at least 2 minutes using a low speed drill (300 - 450 rpm) and Exomixer or Jiffy type paddle suited to the volume of material in the mixing container. Be careful not to introduce any air bubbles while mixing. Make sure the contents are completely mixed to avoid any weak or partially cured spots in the coating. During the mixing sequence, scrape down the sides and bottom of the container with a flat or straight edge trowel at least once to ensure complete mixing.
Do not mix more material than can be applied within the working time limits (i.e. Pot Life) at the actual field temperature.

 In Gallons

In Quarts

In Ounces

Application of the Sikagard® 215 material, use a 3/8” nap roller, a ½’’ nap roller may be required on certain substrates.