Flooring Joints

Benefits:

Floor joints in heavily travelled areas equipped with conventional steel profiles are subjected daily to high loads and traffic. If the profiles are not perfectly flat, they can cause vibration, noise and damage to transport equipment. Sika now offers the perfect solution to this problem with ultra-thin and almost invisible FloorJoint S profiles.

Our profiles are installed on the same surface level as the floor, which means no more thresholds, no more bone-jarring jolts and no more expensive damage to vehicles.

Floor Joint 3-D

Sika® Floor Joint S

Sika® Floor Joint S is a prefabricated, carbon-fiber-reinforced polymer
composite panel with high physical properties. Due to the wave joint
design, an improved load distribution is achieved.

Usage

Floor joint panel for joints in concrete screeds on new construction and renovation projects with normal to medium-heavy wear and refurbishment of joints in concrete screeds with normal up to medium-heavy wear, such as storage, assembly halls, maintenance workshops, hospitals, schools and warehouses.

Method Statment

Sikafloor® 264 Prepigmented Epoxy Coatings

Versatile Colored Epoxy Resin for High Performance Floor Finishes.
Sikafloor 264 is a pigmented, two part low viscosity, self-priming (see
priming section), epoxy coating / binder used for smooth and textured
coatings and/or broadcast overlayments.

USAGE

Roller coat and self-leveling slurry for concrete and cement screeds with normal up to medium heavy wear (e.g. storage, hallways, corridors and assembly halls, maintenance workshops, garages and loading ramps), or as a seal coat for broadcast systems. When used as a primer, Sikafloor 264 can be considered when ≤ 4% moisture content by mass is measured on the concrete substrate with a Tramex® CME/CM Expert type concrete moisture meter.

SDS: Sikafloor 264 Part A

SDS: Sikafloor 161/264 Part B

Sikafloor 304 W

Sikafloor 304 W is a low VOC, clear, two part water-based polyurethane matte topcoat for use with flexible membrane systems.

USAGE

Matte finish top coat for for use with flexible membrane systems including Sikafloor and Sika ComfortFloor Systems.

SDS: Sikafloor® 304 W Part A

SDS: Sikafloor®-304/305 W Part B

Sikadur 31 Hi-Mod Gel

Sikadur® 31, Hi-Mod Gel, is a 2-component, 100% solids, solvent-free, moisture-tolerant, high-modulus, high strength, and structural epoxy paste adhesive. It conforms to the current ASTM C-881, Types I and IV, Grade-3,
Class-B/C and AASHTO M-235 specifications.

USAGE

Structural bonding of concrete, masonry, metals, wood, etc. to a maximum glue line of 1⁄8 in. (3 mm). Grout bolts, dowels, and pins. Seals cracks and around injection ports prior to pressure-injection grouting. Interior, vertical, and overhead repair of concrete as an epoxy mortar binder. As a pick-proof sealant around windows, doors, lock-ups etc. inside correctional facilities.

SDS: Sikadur 31 Hi-Mod Gel Part A 

SDS: Sikadur 31 Hi-Mod Gel Part B