Epoxy Primers

Sikafloor® 160 Primer and Binder

Epoxy Epo-Rok Mortar System. A three-component, high solids epoxy floor
resurfacer. This product can be applied using a screed and finished by
hand troweling or power troweling. Typical thickness is from 3/16” (4.8
mm) to 1/4” (6 mm).

USAGE

Designed for overlaying new and resurfacing worn concrete floors in light to heavy duty industrial applications. Sikafloor 160 is formulated to restore and protect concrete floors from impact and abrasive traffic.

SDS: Sikafloor 160 Part A

SDS: Sikafloor 160 Part B

Sikafloor® 1610

A two component, high solids, red transparent epoxy primer. This epoxy
primer is specially formulated to perform as a moisture tolerant primer.

USAGE

Sikafloor 1610 is designed as a primer for Sikafloor epoxy and urethane coatings, as well as broadcast and troweled systems. Sikafloor 1610 should be considered where ≤ 6% mass (pbw – part by weight) is measured on concrete substrate with Tramex® CME CM Expert type concrete moisture meter.

SDS: Sikafloor 1610 Part A

SDS: Sikafloor 1610 Part B

Sikafloor® 161

Versatile Epoxy Resin for Priming and Leveling mortars. Sikafloor 161 is
designed as a primer for Sikafloor Epoxy and Urethane Coatings, as well
as Broadcast and Troweled Systems.

Usage

Sikafloor 161 is designed as a primer for Sikafloor epoxy and urethane coatings, as well as for broadcast and troweled systems. When used as primer Sikafloor 161 can be considered where ≤ 4% moisture content by mass (pbw – part by weight) is measured on concrete substrate with Tramex® CME/CMExpert type concrete moisture meter.

SDS: Sikafloor® 161 Part A

SDS: Sikafloor® 161/264 Part B

Sikafloor® 165 FS

Sikafloor 165 FS is a two part, epoxy resin used for priming.

USAGE

Sikafloor 165 FS is designed as a fast setting primer for Sikafloor epoxy and urethane coatings, as well as for broadcast and troweled systems. When used as a primer, Sikafloor 165 FS can be considered where ≤ 4% moisture content by mass (pbw – part by weight) is measured on concrete substrate with Tramex® CME/CMExpert type concrete moisture meter.

SDS: Sikafloor 165 FS Part A

SDS: Sikafloor 165 FS Part B 

Sikafloor® 2570 WB

Sikafloor 2570 WB is a water-based, low VOC, two part epoxy resin primer.

USAGE

Sikafloor 2570 WB is designed as a primer for Sikafloor epoxy and urethane coatings, as well as for broadcast and troweled systems. When used as a primer Sikafloor 2570 WB can be considered where ≤ 6% moisture content by mass (pbw – part by weight) is measured on concrete substrate with Tramex® CME/CMExpert type concrete moisture meter.

SDS: Sikafloor 2570 WB Part A

SDS: Sikafloor 2570 WB Part B