Sika Injection-310 US

The First Powder-Based 1-Component Acrylate Waterproofing Injection Resin in the Market

Sika® Injection-310 US is a 1-component, powder-based polyacrylic injection resin for use in waterproofing repair. The all in one, ready to use powder, only requires mixing with water. After the addition of water, the chemical reaction is activated producing a very low viscosity resin which cures to form a tough-elastic gel. 

Sika Injection 310
ADVANTAGES
  • 1-C-Powder Based
  • Easy to apply
  • Time saving and economical
  • Solvent free
  • Easy to mix
  • Sustainable - only water for activation and cleaning
  • Extreme low viscosity
  • Watertight up to 7 Bar (234 FT)
Sika Injection-310 US
Brochure
PDF - 1 MB (en)

USES

Leaking Crack/Penetrations Dry and/or containing water
Injection for waterproofing leaking cracks 3d rendering
Leaking Expansion Joints (movement) & Construction Joints
Injection for waterproofing leaking expansion joint 3d rendering
Leaking Membrane Compartment Systems
Injection for waterproofing leaking sheet membrane 3d rendering
Leaking Wall/Kicker Areas
Injection for waterproofing leaking walls and kicker areas 3d rendering

FROM PREPARATION TO APPLICATION

1. 
Pour 2 Gallons of Water

2. 
Open Bag

3. 
Add Powder

4. 
Mix for 3 min 900 rpm

5. 
Fill Pump

6. 
Connect & Go!