SIKALASTIC DECKPRO
Vehicular traffic coating applications refer to any surface that has a heavier traffic load including parking garages, parking decks and ramps, stadiums and arenas. These surfaces require a durable, long-lasting solution that will withstand the day-to-day vehicular traffic and Sika has created multiple systems that can do the job. Our Sikalastic DeckPro product line consists of single and two-component systems available in gray, charcoal and tan as well as an optional line of high-performance aliphatic topcoats in clear, standard and custom colors. These decorative options offer application flexibility and decorative options. These systems are compatible with Sika’s sealants and mortars which complement our trusted repair and protection solutions.
WHAT PRIMER SHOULD I USE?
Primers Available & Advantages
| Sikalastic Primer | Sikalastic FTP | Sikalastic FTP Lo-VOC | Sikalastic PF Lo-VOC | Sikalastic MT | Sikalastic Recoat | Sikalastic EP Primer | |
| Basis | 1c Polyurethane | 2c Water-borne Epoxy | 2C Epoxy | 2C Pore-Filling Epoxy | 2c Moisture Tolerant Epoxy | 2C Polyurethane | 2c Epoxy |
| Use On | Concrete & Plywood | Concrete & Plywood | Concrete & Plywood | Concrete, Plywood, Metal | Concrete & Plywood | Existing Urethane Coating, Interply | Concrete, Asphalt, Metal |
| Why Use | Fast Cure, No Mixing, Cost effective | Cost effective | Higher Moisture and Porous Substrate | Porous and uneven substrates | Higher Moisture | Recoating or missed recoat window | Metal Substrate |
| Max. Moisture | 4% | 4% | 6% | 4% Exterior 5% Interior | 6% | N/A | 4% |
| Coverage (Typ.) | 300 sf/gal | 300 sf/gal | 300 sf/gal | 20-200 sf/gal, 1/8”max. thickness | 175 sf/gal | 300 sf/gal | 250 sf/gal |
| Recoat Time | 45 min | 3-4 hours | 4-6 hours | 3-5 hours | 6-8 hours | 3 hours | 9 hours |
Primer Substrate Compatibility
| Concrete | Wood | Metal | PU Sealant | PU Coating | EP Coating | PVC | |
| Sikalastic Primer | X | X | X | X | X | ||
| Sikalastic FTP | X | X | |||||
| Sikalastic FTP Lo-VOC | X | X | X | X | X | ||
| Sikalastic PF Lo-VOC | X | X | X | X | |||
| Sikalastic MT | X | X | X | X | |||
| Sikalastic EP | X | X | X | X | X | X | |
| Sika Primer 260 | X | ||||||
| Sika Primer 449 | X | ||||||
| Sikalastic Recoat Primer | X | X | X |
COMMON VEHICULAR SYSTEMS
ONE - COMPONENT
Sikalastic 710/715/735 AL
| System Guide | Light Vehicular - Seed & Lock | Light Vehicular - Seed & Backroll | Heavy Vehicular - Seed & Lock | Heavy Vehicular - Seed & Backroll |
|---|---|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | |||
| 710 Detail Coat | 32 mils wet over properly treated cracks and joints. | |||
| 710 Base Coat | 32 mils wet (23 mils dry) - 50 sf/gal. | |||
| 715/735 AL Top Coat I | 11 WFT (8 mils dry) - 145sf/gal | 11 WFT (8 mils dry) - 145 sf/gal | 11 WFT (8 mils dry) - 145 sf/gal | 22* WFT (16 mils dry) - 73 sf/gal |
| Aggregate | 20-40 lbs/100 sf | 10-15 lbs/100 sf -seeded/backrolled | 10-15 lbs/100 sf -seeded | 10-15 lbs/100 sf -seeded/backrolled |
| 715/735 AL Top Coat II | 16 WFT (12 mils dry) - 100 sf/gal | 16 WFT (12 mils dry) - 100 sf/gal | 16 WFT (12 mils dry) - 100 sf/gal | 22* WFT (16 mils dry) -73 sf/gal |
| Aggregate | 10-15 lbs/100 sf -seeded/backrolled | 10-15 lbs/100 sf -seeded | 10-15 lbs/100 sf -seeded/backrolled | |
| 715/735 AL Top Coat III | 16 mils wet (12 mils dry) - 100 sf/gal | |||
| Total Thickness | 43 DFT (excluding aggregate) | 43 DFT (excluding aggregate) | 55 DFT (excluding aggregate) | 55 DFT (excluding aggregate) |
| See separate Sikalastic® Aliphatic Top Coats data sheet for DecoQuartz® and DecoFlake® systems. | ||||
| NOTE:* Requires use of 700 ACL Accelerator with 715 Top Coat, and with 735 AL Top Coat. | ||||
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregate selection and embedment, and application technique. | ||||
Sikalastic 710/715 Textured
| System Guide | Light Vehicular | Heavy Vehicular |
|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | |
| 710 Detail Coat | 32 WFT over properly treated cracks and joints. | |
| 710 Base Coat | 32 WFT (23 mils dry) - 50 sf/gal. | |
| 715 Textured Top Coat I | 14 WFT (10 DFT) 87 sf/gal | 20 WFT (16 DFT) 58 sf/gal |
| 715 Textured Top Coat II | 16 WFT (12 DFT) 80 sf/gal | 20 WFT (16 DFT) 58 sf/gal |
| Total Thickness | 45 DFT | 55 DFT (excluding aggregate) |
| See separate Sikalastic® Aliphatic Top Coats data sheet for DecoQuartz® and DecoFlake® systems. | ||
| NOTE:* Requires use of 700 ACL Accelerator with 715 Top Coat, and with 735 AL Top Coat. | ||
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregateselection and embedment, and application technique. | ||
Sikalastic 710/715/736 AL Lo-VOC
| System Guide | Light Vehicular - Seed & Lock | Light Vehicular - Seed & Backroll** | Heavy Vehicular - Seed & lock | Heavy Vehicular - Seed & Backroll |
|---|---|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | |||
| 710 Base Lo-VOC Detail Coat | 26 WFT over properly treated cracks and joints. | |||
| 710 Base Lo-VOC BaseCoat | 26 WFT (23 mils dry) - 61 sf/gal. | |||
| 715 Top Lo-VOC /736 AL Lo-VOC Top Coat I* | 9/10 WFT (8 mils dry) - 178/160 sf/gal | 23**/24** WFT (20 milsdry) - 69/67 sf/gal | 9/10 WFT (8 mils dry) -178/160 sf/gal | 18/19 WFT (16 mils dry) - 89/85 sf/gal |
| Aggregate | 10-15 lbs/100 sf -seeded | 15-20 lbs/100 sf -seeded/backrolled | 10-15 lbs/100 sf -seeded | 15-20 lbs/100 sf -seeded/backrolled |
| 715 Top Lo-VOC /736 ALLo-VOC Top Coat II* | 13/14 WFT (12 mils dry) - 123/114 sf/gal | 13/14 WFT (12 mils dry) - 123/114 sf/gal | 18/19 WFT (16 mils dry) - 89/85 sf/gal | |
| Aggregate | 10-15 lbs/100 sf -seeded | 15-20 lbs/100 sf -seeded/backrolled | ||
| 715 Top Lo-VOC /736 AL Lo-VOC Top Coat III* | 13/14 WFT(12 mils dry) - 123/114 sf/gal | |||
| Total Thickness | 43 DFT (excluding aggregate) | 43 DFT (excluding aggregate) | 55 DFT (excluding aggregate) | 55 DFT (excluding aggregate) |
| NOTE: *Wet mil and coverage information provided separately for both 715 Top Lo-VOC/736 AL Lo-VOC Top Coats | ||||
| NOTE: **Requires use of 715 Top Lo-VOC Booster with 715 Top Lo-VOC Top Coat, and 700 ACL Accelerator with 736 AL Lo-VOC Top Coat | ||||
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregateselection and embedment, and application technique. | ||||
Sikalastic 710 Lo-VOC / 715 Lo-VOC Textured
| System Guide | Light Vehicular | Heavy Vehicular |
|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | |
| 710 Lo-VOC Detail Coat | 26 WFT over properly treated cracks and joints. | |
| 710 Lo-VOC Base Coat | 26 WFT (23 mils dry) – 61 sf/gal. | |
| 715 Lo-VOC Textured Top Coat I | 12 WFT (10 DFT) 100 sf/gal | 18 WFT (16 DFT) 62 sf/gal |
| 715 Lo-VOC Textured Top Coat II | 14 WFT (12 DFT) 83 sf/gal | 18 WFT (16 DFT) 62 sf/gal |
| Total Thickness | 45 DFT | 55 DFT |
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregateselection and embedment, and application technique. | ||
Sikalastic 710 Lo-VOC / 736 AL Textured
| System Guide | Light Vehicular | Heavy Vehicular |
|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | |
| 710 Lo-VOC Detail Coat | 26 WFT over properly treated cracks and joints. | |
| 710 Lo-VOC Base Coat | 26 WFT (23 mils dry) – 61 sf/gal. | |
| 736 Textured Top Coat I | 12 WFT (10 DFT) 100 sf/gal | 18 WFT (16 DFT) 62 sf/gal |
| 736 Textured Top Coat II | 14 WFT (12 DFT) 83 sf/gal | 18 WFT (16 DFT) 62 sf/gal |
| Total Thickness | 45 DFT | 55 DFT |
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregateselection and embedment, and application technique. | ||
SIKALASTIC 2000 SYSTEM
TWO - COMPONENT
Sikalastic 720/745
| System Guide | Light Vehicular | Heavy Vehicular - Seed & Lock | Heavy Vehicular - Seed & backroll |
|---|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | ||
| 720 Detail Coat | 23 WFT over properly treated cracks and joints. | ||
| 720 Base Coat | 23 WFT(23 DFT) - 70 sf/gal. | ||
| 745 AL Top Coat I | 18 WFT (18 DFT) - 90 sf/gal | 14 WFT (14 DFT) - 115 sf/gal | 14 WFT (14 DFT) - 115 sf/gal |
| Aggregate | 10-20 lbs/100 sf -seeded/backrolled | 20-40 lbs/100 sf -seeded | 10-15 lbs/100 sf -seeded (backroll optional) |
| 745 AL Top Coat II | 18 WFT (18 DFT) - 80 sf/gal | 18 WFT (18 DFT) - 90 sf/gal | |
| Aggregate | 10-15 lbs/100 sf -seeded/backrolled | ||
| Total Thickness | 41 DFT (excluding aggregate) | 55 DFT (excluding aggregate) | 55 DFT (excluding aggregate) |
| See separate Sikalastic® Aliphatic Top Coats data sheet for DecoQuartz® and DecoFlake® systems. | |||
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregateselection and embedment, and application technique. | |||
Sikalastic 720/745 Textured Traffic
| System Guide | Light Vehicular | Heavy Vehicular |
|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | |
| 720 Detail Coat | 23 WFT over properly treated cracks and joints. | |
| 720 Base Coat | 23 WFT (23 mils dry) - 70 sf/gal. | |
| 745 AL Textured Top Coat I | 10 WFT (10 DFT) 110 sf/gal | 16 WFT (16 DFT) 70 sf/gal |
| 745 AL Textured Top Coat II | 12 WFT (12 DFT) 93 sf/gal | 16 WFT (16 DFT) 70 sf/gal |
| Total Thickness | 45 DFT (excluding aggregate) | 55 DFT |
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregate selection and embedment, and application technique. | ||
EPOXY
Sikadur 22 Lo-Mod Hybrid
| System Guide | Standard Vehicular Traffic - Full Broadcast | Heavy Vehicular Traffic - Full Broadcast | Extra Heavy Vehicular Traffic - Full Broadcast |
|---|---|---|---|
| Primer | Sikalastic Primer - 300 sf/gal. Consult Sika for other primer options for recover and high moisture content substrates. | ||
| 710 Base Lo-VOC Detail Coat | 26 WFT over properly treated cracks and joints. | ||
| 710 Base Lo-VOC Base Coat | 26 mils wet (23 mils dry) - 61 sf/gal. | ||
| 22 Lo-Mod Binder I | 20 WFT (20 DFT) - 70 sf/gal | 32 WFT (32 DFT) - 50 sf/gal | 32 WFT (32 DFT) - 50 sf/gal |
| Aggregate I | 1.25 lbs/sf broadcasted to refusal | 1.5 lbs/sf broadcasted to refusal | 1.5 lbs/sf broadcasted to refusal |
| 22 Lo-Mod Binder II | 32 WFT (32 DFT) - 50 sf/gal | ||
| Aggregate II | 1.5 lbs/sf broadcasted to refusal | ||
| 715 Top Lo-VOC /736 AL Lo-VOC TopCoat I* | 21/23 WFT (18 DFT) - 76/70 sf/gal | 21/23 WFT (18 DFT) - 76/70 sf/gal | 21/23 WFT (18 DFT) - 76/70 sf/gal |
| Total Thickness | 61 DFT (excluding aggregate) | 73 DFT (excluding aggregate) | 105 DFT (excluding aggregate) |
| NOTE:* Top Coat is optional for all full broadcast systems. | |||
| NOTE: Coverage rates provided are optimal and are not guaranteed - coverage rates will vary depending on temperature, surface roughness and porosity, aggregateselection and embedment, and application technique. | |||