Product Data Sheet Show all documents

Sikalastic® TC 295

(formerly MSeal TC 295)

ALIPHATIC, POLYURETHANE TOPCOAT FOR SIKALASTIC TRAFFIC 2000 / 2500 / 2530 / 2575 DECK COATING SYSTEMS

Sikalastic® TC 295 is an aliphatic, polyurethane top coat for use in Sikalastic® Traffic 2000, 2500, 2530, and 2575 deck coating systems.

Sikalastic® TC 295 is a two-component waterproofing coating. This material is a high-performing polyaspartic-modified polyurethane with high solids.

  • Great color retention and UV resistance
  • When used within a Sikalastic® Traffic or Pedestrian system, Sikalastic® TC 295 exhibits high adhesion
  • Available in grey, charcoal, clear, and tint base for customization with a multitude of colors and 9 standard blends of flake and quartz
  • Sikalastic® TC 295 is a highly durable, low odor, and high solids top coat
Product Data Sheet Show all documents

Usage

  • Stadiums
  • Balconies
  • Parking Garages
  • Commercial Construction
  • Building and Restoration
  • Plywood Decks/Balconies
  • Plaza Decks
 

Advantages

  • Great color retention and UV resistance
  • When used within a Sikalastic® Traffic or Pedestrian system, Sikalastic® TC 295 exhibits high adhesion
  • Available in grey, charcoal, clear, and tint base for customization with a multitude of colors and 9 standard blends of flake and quartz
  • Sikalastic® TC 295 is a highly durable, low odor, and high solids top coat

Packaging

Pigmented and Tint Base

  • Sikalastic® TC 295 Part A 1.75 gallons (6.62 L) in 6-gallon (22.71 L) pail
  • Sikalastic® TC 295 Part B 3.5-gallon (13.25 L) pail Clear

Clear

  • Sikalastic® TC 295 Clear Part A 2 gallons (7.6 L) in 6-gallon pail
  • Sikalastic® TC 295 Clear Part B 3 gallons (11.4 L) in 3-gallon pail

Color

Grey, Charcoal, Tint Base (See Sika Color Portfolio), Clear

Product Details

Product Information

Chemical Base

High-solids, aliphatic, polyurethane

Shelf Life

Part A: 1 Year
Part B: 1 Year

Storage Conditions

Store in unopened containers in a cool, clean, dry area

Viscosity

2,500- 4,000 (cps)

ASTM D 2393

Solid content by volume

91%
Technical Information

Testing

Sikalastic® TC 295 Grey/Charcoal

94

Sikalastic® TC 295 Tint Base

90

Sikalastic® TC 295 Clear

89

Tensile Strength

Sikalastic® TC 295 Grey/Charcoal 

3,400 psi

Sikalastic® TC 295 Tint Base 

3,000 psi

Sikalastic® TC 295 Clear 

3,530 psi

Elongation

Sikalastic® TC 295 Grey/Charcoal 

340%

Sikalastic® TC 295 Tint Base

390%

Sikalastic® TC 295 Clear 

135%

Application

Application Information

Cure Time

4–8 hours at 73 °F (23 °C) and 50% R.H.
Application steps

SUBSTRATE PREPARATION

Please see preferred Sikalastic® Deck Coating Solution for detail surfacer preparation.

MIXING

MIXING –  Sikalastic® TC 295 (PRE-PIGMENTED/CLEAR)

  • Precondition both A and B components to a temperature of approximately 70 °F (21 °C).
  • Add entire contents of Part A into Part B. Mix components with a slow-speed drill (400–600) rpm, for a minimum of 3 minutes. Scrape down sides and bottom of mixing vessel, then mix again for 2 minutes. Keep the mixing paddle submerged during mixing to avoid adding air into the mixture

  

MIXING – Sikalastic® TC 295 TINT BASE

  • Precondition both A and B components to a temperature of approximately 70 °F (21 °C).
  • Add entire contents of Part B into Part A. Mix components with a slow-speed drill (400–600) rpm, for a minimum of 3 minutes.
  • Transfer entire contents of two (2) Sikaflex 900 color paks cans into Sikalastic® TC 295 Tint Base mixed kit. Use a spatula or knife to remove all the pigment from the container. The Sikalastic® TC 295 Tint Base Top Coat requires two (2) Sikaflex 900 color paks per 5.25-gallon pail.
  • Scrape down sides and bottom of mixing vessel, then mix again for 2-3 minutes. Keep the mixing paddle submerged during mixing to avoid adding air into the mixture.
  • To ensure consistent color throughout the pail, pour contents into separate container and continue mixing until all Sikalastic® TC 295 Tint Base has dispersed.
  • When using multiple units, all units must be boxed to ensure color consistency.

APPLICATION

Apply at the recommended coverage rate (see appropriate System Guide) using a notched squeegee or trowel and backroll using a phenolic resin core roller. Apply aggregate evenly distributed at the appropriate rate immediately into wet coating and backroll if required (see appropriate System Guide). Please see the applicable Sikalastic®Deck Coating system data sheet for total system and aggregate surface preparation and application.
  

Exterior applications must utilize Sikalastic® TC 295 at the specified coverage rate.

  

Removal

Remove liquid coating immediately with dry cloth. Once cured, coating can only be removed by mechanical means.

Documents