Sikalastic® M 205

Single-component, moisture-curing polyurethane base coat.

When properly stored, a 5-gallon Pail has a 1-year shelf life.

Store in unopened containers in a cool, clean, dry area

1.25  kg/L

4,000–9,000

Cold temperatures will increase viscosity

No Cracking

12−14 hours at 73 °F (23 °C) and 50% R.H.

Thoroughly mix coating using a mechanical mixer (Jiffy) at slow speed until a homogenous mixture and uniform color is obtained (typically 1 minute). Use care not to allow the entrapment of air into the mixture.

Apply at the recommended coverage rate (see appropriate System Guide) using a notched squeegee or trowel, and backroll using a phenolic resin core roller. Extend base coat over entire area including previously detailed cracks and joints. Allow coating to cure a minimum of 16 hours at 70 °F and 50 % R.H before overcoating, extend curing time in cool or dry weather conditions.

Remove liquid coating immediately with dry cloth. Once cured, coating can only be removed by mechanical means.