Product Data Sheet Show all documents

Sikalastic® M 200

(formerly MSeal M 200)

POLYURETHANE BASE COAT FOR SIKALASTIC® TRAFFIC 1500 AND 2000 DECK COATING SYSTEMS

Sikalastic® M 200 is a one-component, moisture-curing polyurethane base coat for use in Sikalastic® Traffic 1500 and 2000 deck coating systems.

  • Sikalastic® M 200 has strong adhesion properties
  • Easy preparation reduces on-site labor costs
  • Available in both self-leveling and flash/sloping
Product Data Sheet Show all documents

Usage

  • Stadiums
  • Balconies
  • Parking Garages
  • Commercial Construction
  • Building and Restoration
  • Plywood Decks/Balconies
  • Plaza Decks
 

Advantages

  • Sikalastic® M 200 has strong adhesion properties
  • Easy preparation reduces on-site labor costs
  • Available in both self-leveling and flash/sloping

Packaging

  • 5 gallon (18.93 L) pails
  • 55 gallon (208 L) drums Self-Leveling Only

Color

Light Gray

Product Details

Product Information

Chemical Base

Sikalastic® M 200 is a moisture-curing polyurethane base coat.

Shelf Life

When properly stored, Sikalastic® M 200 products have the following shelf life:

  • 5-Gallon Pail: 1 Year
  • 55-Gallon Drum: 9 Months

Storage Conditions

Store in unopened containers in a cool, clean, dry area

Viscosity

4,000-9,000 cps

Cold temperatures will increase viscosity.

Solid content by volume

81%

 
Technical Information

Shore Hardness

60

(ASTM D 2240), Shore A

Tensile Strength

752 psi (5.2 MPa)

(ASTM D 412)

Elongation

595%

(ASTM D 412)

Tear Strength

74 

(ASTM D 1004)

Adhesion in peel

Pull off  (psi)

400

(ASTM D 4541)

  

Adhesion in peel after Water immersion, (pli)

Primed mortar

43 

Plywood34

Application

Application Information

Cure Time

12−14 hours at 73 °F (23 °C) and 50% R.H.
Consumption

Coverage

55-60 sf/gal at 25 mils

See preferred Sikalastic® Deck Coating Solution for total system yield
Application steps

MIXING

Thoroughly mix coating using a mechanical mixer (Jiffy) at slow speed until a homogenous mixture and uniform color is obtained (typically 1 minute). Use care not to allow the entrapment of air into the mixture.

APPLICATION

Apply at the recommended coverage rate (see appropriate System Guide) using a notched squeegee or trowel, and backroll using a phenolic resin core roller. Extend base coat over entire area including previously detailed cracks and joints. Allow coating to cure a minimum of 16 hours at 70 °F and 50 % R.H before overcoating, extend curing time in cool or dry weather conditions.

CLEANING OF TOOLS

Remove liquid coating immediately with a dry cloth. Once cured, coating can only be removed by mechanical means.

Documents