Product Data Sheet Show all documents
SCOFIELD® SelectSeal™ Plus

SCOFIELD® SelectSeal™ Plus

A high-solids, low-odor, self-crosslinking, urethane fortified acrylic sealer designed to protect interior or exterior bare or previously stained concrete

SCOFIELD® SelectSeal™ Plus is a high-solids, low-odor, self-crosslinking, urethane fortified acrylic sealer designed to protect interior or exterior bare or colored concrete. It is an excellent sealer to use over LITHOCHROME® TinturaTM Stain, LITHOCHROME® Chemstain® Classic, LITHOCHROME® Color Hardener, SCOFIELD® Texturetop®, SCOFIELD® ReviveTM Exterior Concrete Stain, or SCOFIELD® Formula OneTM Liquid Dye Concentrate.   SCOFIELD® SelectSeal™ Plus utilizes unique proprietary waterborne technology that provides superior wet slip resistance while forming a tough stain and abrasion-resistant gloss finish that is superior to most solvent-based sealers. It can be tinted to deliver a multitude of translucent colored effects, and can be used to create floors compliant to various ANSI, ASTM, NFSI, and UL traction standards.   SCOFIELD Selectseal Plus can be applied by traditional, foam, or microfiber applicators, as well as by conventional, air-assisted, airless, or HVLP spray equipment. It can be applied over a wide range of temperature and humidity conditions without cracking, crazing, frosting, or gumming.  

  • High-solids, low odor water-based formulation
  • Enhances concrete and chemical stain colors
  • Self-Crosslinking resin system delivers superior stain, abrasion, and chemical resistance
  • Exterior durable and UV light stable
  • Apply by brush, roller, or spray
  • Can be thinned for use as a clear primer
  • Will not gum or spider-web in hot conditions
Product Data Sheet Show all documents

Usage

  • Ideal for food courts, pools, entry and walkways
  • Seals in color of antiquing stamp releases and stains
  • Abrasion resistant topcoat over stains and dyes
  • As a concrete curing compound to reduce spider cracking and efflorescence
  • Prevents dusting of new or aging concrete
  • Can be used on cementitious overlays

Advantages

  • High-solids, low odor water-based formulation
  • Enhances concrete and chemical stain colors
  • Self-Crosslinking resin system delivers superior stain, abrasion, and chemical resistance
  • Exterior durable and UV light stable
  • Apply by brush, roller, or spray
  • Can be thinned for use as a clear primer
  • Will not gum or spider-web in hot conditions

Packaging

1-gallon (3.8L) cans or 5-gallon (19L) pails.

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

SCOFIELD® SelectSeal™ Plus can be used to make floors that exceed the Underwriters Laboratories Safety Standard UL 410, "Slip Resistance of Floor Surface Materials."

Meets the moisture retention requirements of ASTM C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete.

 

Product Information

Chemical Base

Urethane fortified self-crosslinking acrylic copolymer, 30% solids

Shelf Life

24 months

Storage Conditions

Store at 40°F to 120°F (4°C - 49°C). Do not freeze.

Application

Application Information

Drying Time

Dry times will depend upon the selected coverage rate, penetration into the substrate, and weather conditions. At 70°F (21°C) and 50 % relative humidity with an application rate of 400 sq. ft. per gallon (10 m2/L), dry to touch and recoat times of 1–2 hours are expected. Avoid foot-traffic for a minimum of 12 hours, and hard wheel traffic for 72 hours after final application.
Consumption

Coverage

Coverage will depend upon thinning, method of application, surface porosity, and the texture of the substrate. Full strength prime-coat coverage on flat finished concrete is typically 300–400 sq. ft./gal. (7.4–9.8 sq. m/L), and will yield a dry film thickness of 1.3–1.1 mils. Thinned with 1 pint of water per gallon, prime coat coverage is typically 450 sq. ft./gal., and will yield a dry film thickness of 0.85 mils. Porous, broom or textured finishes will require more sealer. As a topcoat or for second coat application, coverage of 600–800 sq. ft./gal. (14.8–19.6 sq. m/L) is typical.
Application steps

EQUIPMENT

Apply SCOFIELD® Selectseal™ Plus by brush, roller, HVLP sprayer, airless sprayer, or pump-spray/back-roll application.

 

Spray Applicator Guidelines:

Pump Garden SprayerUse conical tip
Airless Sprayer1500-2500 psi (10-17 MPa) fitted with a fan tip of 0.013-0.015 in. (0.33-0.38 mm)
HVLP Sprayer5-40 psi (35-275 KPa) 1.3–1.5 mm tip

MIXING

SCOFIELD® Selectseal™ Plus is iridescent white and will look like a heavy cream. Mix until it is of uniform consistency and appearance prior to use. If tinting, add tint material and mix again until uniform. To increase penetration into acid stained or sandblasted concrete, SCOFIELD® Selectseal™ Plus may be thinned with up to 1 pint of water per gallon of material.

APPLICATION

Mask all areas not to be coated to safeguard against splashes, overspray, and runoff from application. Wear all required safety equipment. Take care not to allow tape adhesive to interfere with surfaces to be coated. Product may appear lighter in color until dry.

 

Distribute product with a pump garden sprayer fitted with a conical tip, followed by back rolling with a quality 3/8" knap roller. Roll in multiple directions to ensure product penetrates into concrete cracks, joints, and pores. Take care not to create lap marks as they cannot be removed once the product has dried. Dried material will be difficult to remove. Remove overspray immediately with hot water and detergent.

CLEANING OF TOOLS

Clean equipment with warm water and detergent immediately after application.

Documents