Product Data Sheet
Show all documents
SikaBond® Construction Adhesive

SikaBond® Construction Adhesive

One part, advanced polyurethane, elastomeric adhesive

SikaBond® Construction Adhesive  is a one-component, durable and flexible exterior polyurethane adhesive. It has excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, and wood.

  • Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, and wood
  • Fast cure rate
  • Waterproof and water immersible after cure
  • Good weathering resistance
  • Non-corrosive
  • Can be painted over with water, oil, and rubber-based paints. (Preliminary tests recommended)
  • High durability and flexible
  • Can be used to fill in gaps, Gray in color.
Product Data Sheet
Show all documents

Usage

As an elastic adhesive for:
  • Paver caps, masonry veneer and faux stone
  • Submerged applications (ex. Pond)
  • Net tile installation
  • Floor moldings and door sills
  • Light weight construction materials
  • Wood or metal window and door frames
 

Advantages

  • Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, and wood
  • Fast cure rate
  • Waterproof and water immersible after cure
  • Good weathering resistance
  • Non-corrosive
  • Can be painted over with water, oil, and rubber-based paints. (Preliminary tests recommended)
  • High durability and flexible
  • Can be used to fill in gaps, Gray in color.

Packaging

10.1 fl. oz. (299 ml) moisture proof composite cartridge, 12/case

29 fl. oz. (858 ml) moisture proof composite cartridge, 6/case

Color

Gray

Product Details

Product Information

Shelf Life

12 months in original, unopened container
 

Storage Conditions

Store at 40 to 95 °F (4 to 35 °C). Condition material to 65 to 75 °F (18 to 24 °C) before using
Technical Information

Tensile Strength

225 psi

(ASTM D-412)

Tested at:

73 °F (23 °C)

50 % R.H.

Chemical Resistance

Good resistance to water, diluted acids, and diluted alkalines.

Consult Technical Service for specific data

Service Temperature

-40 to 170 °F (-4 to 77 °C)

Resistance to Weathering

Excellent

Application

Application Information

Ambient Air Temperature

40 to 100 °F (4 to 38 °C)

Cure Time

5 to 7 days

Skin Time

2 hours (depends on temperature and humidity)

(TT-S-00230C)

Tested at:

73 °F (23 °C)

50 % R.H.
Consumption

Coverage

10.1 fl . oz. cartridge yields 12.2 lineal ft. of 1/2 in. x 1/4 in. bead
29 fl . oz. cartridge yields 35 lineal ft. of 1/2 in. x 1/4 in. bead
Application steps

SUBSTRATE PREPARATION

Clean all surfaces. Surface must be sound, clean, dry, frost-free, and free of oil and grease. Curing compound residues and any other foreign matter must be thoroughly removed.

  

Priming is not usually necessary for non-absorbent materials such as anodized aluminum, steel,  glass, ceramics, stoneware and tiles.

Documents