Product Data Sheet
Show all documents
SikaFiber® Novomesh®-850

SikaFiber® Novomesh®-850

Blended Fiber - Steel Fiber Type V and Micro Synthetic

SikaFiber® Novomesh®-850 an engineered blend of steel and micro fibers are designed specifically for the reinforcement of concrete. SikaFiber® Novomesh®-850 is a cold drawn continuously deformed steel fiber and 100 percent virgin homopolymer polypropylene graded multifilament micro synthetic fiber. The blend of steel and micro fiber provide optimum combination of plastic shrinkage and long term reinforcement within the concrete. SikaFiber® Novomesh®-850 previously Novomesh 850 or SikaFiber Force 850.

  • Provides uniform multi-directional concrete reinforcement
  • Increases crack resistance, ductility, energy absorption or toughness of concrete
  • Improves impact resistance, fatigue endurance and shear strength of concrete
  • Steel fiber bridging joints and cracks to provide tighter aggregate interlock resulting in increased load-carrying capacity
  • Provides increased ultimate load-bearing capacity 
  • Requires less labor to incorporate into concrete than conventional reinforcement
  • Micro synthetic fiber reduces plastic shrinkage cracking
Product Data Sheet
Show all documents

Usage

  • Commercial and light industrial slabs on ground
  • Equipment foundations
  • Composite metal decks  
  • Pavements
  • Overlays
 

Advantages

  • Provides uniform multi-directional concrete reinforcement
  • Increases crack resistance, ductility, energy absorption or toughness of concrete
  • Improves impact resistance, fatigue endurance and shear strength of concrete
  • Steel fiber bridging joints and cracks to provide tighter aggregate interlock resulting in increased load-carrying capacity
  • Provides increased ultimate load-bearing capacity 
  • Requires less labor to incorporate into concrete than conventional reinforcement
  • Micro synthetic fiber reduces plastic shrinkage cracking

Packaging

SikaFiber® Novomesh®-850 fibers are available in 10.9 kg (24 lb) degradable bags.

Color

Micro synthetic:

  • Fiber Type: Monofilament Micro Synthetic Fiber
  • Fiber Network:  22,000,000 fibers/lb

Steel fiber:

  • Fiber Type: Continously Deformed Steel Fiber Type V
  • Fiber Network:   1,500 fibers/lb

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Steel fiber conforms to ASTM A820 /A 820M - 04,Type V cold drawn wire
  • Synthetic micro fiber conforms to ASTM D7508
  • Conform to ASTM C 1116/C 1116M, Type I & Type III fiber reinforced concrete
  • UL Classified: For use as an alternate or in addition to the welded wire fabric used in Floor-Ceiling D700, D800, D900 Series Designs. Fibers may also be used in Floor-Ceiling Design Nos. G229, G243, G256, G514
Product Information

Shelf Life

If stored in dry conditions shelf life is 5 years.

 

Storage Conditions

SikaFiber® Novomesh®-850 should be stored in a dry warehouse. Protect product from the rain.

Dimensions

Steel Fiber:

  • Length: 1.5 inches (38 mm)
  • Equivalent Diameter: 0.045 inches (1.14 mm)
  • Aspect Ratio:  30

Synthetic Micro Fiber:

  • Length: Graded 0.5 & 0.75 inches (12.7 & 19 mm). 
  • Diameter: Graded 0.0012 & 0.002 inches (0.03 & 0.05 mm).
  • Aspect Ratio: Varies from  250 to 630
Technical Information

Tensile Strength

Steel fiber:  >140 ksi (964 MPa)

Application

Application Information

Mixing

SikaFiber® Novomesh®-850 in degradable bag can be added directly to the  concrete mixing system after the batching of the other ingredients and mixed for 4 to 5 minutes or 70 revolutions. Only a water reducing or high range water reducing admixture should be used to adjust concrete to the desired workability.

Application

The addition of SikaFiber® Novomesh®-850 at the normal recommended dosage rate does not require any mix design or application changes. The fiber concrete can be mixed, sprayed or placed using conventional equipment.

Tooling & Finishing

SikaFiber® Novomesh®-850 can be used in power/hand troweled concrete, colored and broom finished concrete.  Fiber reinforced concrete can be finished by most finishing techniques as indicated in ACI-302.  Proper timing and workmanship are importante when using a steel fiber to insure the fiber is not elevated at the surface.
Consumption

Recommended Dosage

The dosage of the SikaFiber® Novomesh®-850 will vary according to the type of application and the performance requirements of the project.  Standard recommended dosage rate of SikaFiber® Novomesh®-850 is between 24 - 48 lbs/cu. yd. (14–28.5 kg/m3) of concrete. Dosages outside the recommended dosage range can be used to meet project specific requirements. If this is the case please contact your Sika representative for technical support.

Documents