Product Data Sheet Safety Data Sheet Show all documents
Sika Boom®

Sika Boom®

ONE-COMPONENT, POLYURETHANE FOAM

Sika Boom® is a pre-pressurized, portable, one-component, polyurethane foam system applied in a bead form. Sika Boom® expands and cures slowly to a semi-rigid, closed cell foam upon reaction with moisture, such as ambient humidity. It is designed for easy dispensing through a straw adapter that is included with each can.

  • Tack-free in approximately 5 minutes or less, based on moisture/temperature conditions.
  • Fully cures within 12 to 24 hours.
  • Cured foam can be sanded, painted or covered
  • Cured foam is resistant to heat and cold.
  • Adheres to most building materials.
  • Expands 2 to 3 times its original size.
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • On any clean surface to fill, insulate and seal around gaps, beneath base plates, muds sills, top plate penetrations, corner joints, T-joints, exterior cracks, around utility panels, pipes, duct penetrations, etc.
  • For dispensing as a bead for filling cracks, crevices, and to fill smaller cavities.
 

Advantages

  • Tack-free in approximately 5 minutes or less, based on moisture/temperature conditions.
  • Fully cures within 12 to 24 hours.
  • Cured foam can be sanded, painted or covered
  • Cured foam is resistant to heat and cold.
  • Adheres to most building materials.
  • Expands 2 to 3 times its original size.

Packaging

12 oz. can, 12/carton. 20 oz. can, 12/carton

Color

Light yellow

Product Details

Product Information

Shelf Life

18 months.

Storage Conditions

Store in a cool, dry area. Do not expose to open flame or temperatures above 120 °F (49 °C). Store at room temperature before use.

Density

1.10 lbs/ft3 (19.2 kg/m3)

(ASTM D-1622)
Technical Information

Compressive Strength

8.17 psi (56.2 kPa) - parallel to rise

(ASTM 1621)

Tensile Strength

12 psi (83 kPa) - parallel to rise

(ASTM 1623)

Dimensional Stability

± 5 %

(ASTM 2126)

Resistance to fire

Flame Spread: 25
Smoke Developed: 50

(ASTM E84)

Service Temperature

-200 °F to 240 °F (-29 °C to 93 °C)

Application

Application Information

Ambient Air Temperature

40 °F (18 °C) and 120 °F (38 °C)

Substrate Temperature

40 °F (18 °C) and 120 °F (38 °C)

Cure Time

12–24 hours

Cutting Time

1 hour (1” Bead at room conditions)

Tack Free Time

Approx. 5 minutes
Consumption

Coverage

12oz can = 1/4” Bead (6 mm) =

1,996 ft. (608 m)

20oz can = 1/4” Bead (6 mm) =

3,317 ft. (1,011 m)

12oz can = 3/8” Bead (9 mm) =

887 ft. (270 m)

20oz can = 3/8” Bead (9 mm) =

1,474 ft. (499 m)

12oz can = 1/2” Bead (12 mm) =

499 ft. (152 m)

20oz can = 1/2” Bead (12 mm) =

829 ft. (253 m)
Application steps

APPLICATION INSTRUCTIONS

For the application of Sika Boom® all generally accepted rules of building and construction apply.

SUBSTRATE PREPARATION

Substrate must be clean, firm, free of loose particles and free of dust, grease, mold release agents. Protect surfaces not to be foamed. Shake can before using. For best results in cavities larger than 3 inches in diameter, dampen substrate to supplement atmospheric pressure humidity in affecting consistent cure throughout applied foam.

Documents