Product Data Sheet
Show all documents
Sika® Reemat Standard

Sika® Reemat Standard

Randomly oriented glass fiber reinforcement for Sikalastic® RoofPro systems

Surface treated, randomly oriented glass fiber reinforcement used to enhance the strength and durability of Sikalastic® RoofPro, 621 TC, 624 WP,
641 Lo-VOC and 644 Lo-VOC roofing and waterproofing systems.

  • Provides maximum conformability to uneven substrates
  • Creates strong reinforced roofing and waterproofing membranes with enhanced tensile strength
  • Increases puncture and tear resistance
Product Data Sheet
Show all documents

Usage

  • Ideal for roofing and waterproofing applications when detailing complex and geometridally shaped surfaces or when accessibility is limited
  • Suitable for applications where visibility of reinforcement overlaps is an aesthetic concern
 

Advantages

  • Provides maximum conformability to uneven substrates
  • Creates strong reinforced roofing and waterproofing membranes with enhanced tensile strength
  • Increases puncture and tear resistance

Packaging

39" (1 m) w x 656' (200 m), individually bagged rolls

Color

Off-White

Product Details

Product Information

Shelf Life

N/A

Storage Conditions

Store rolls on end, and not on their side in original unopened and undamaged sealed packaging in dry conditions.

Recommended to condition material to 50°-77°F (10°-25°C) before using to match liquid resin.

Dimensions

Gross Area: 2,132 ft² (198 m2)

Application

Application steps

SUBSTRATE PREPARATION

Substrate surfaces, including flashing substrates, shall be primed, clean and dry, in accordance with separate System Data Sheet.

APPLICATION

Apply the specified base layer resin quantity to primed substrate surface with a 1/2” (12.7 mm) nap phenolic resin core roller. Immediately place Sika® Reemat into wet resin, overlapping reinforcement 2” (50.8 mm) along the sides and at the roll ends. Apply wet roller to topside with light pressure to completely saturate the Reemat. Allow the Reemat to conform to substrate irregularities and flashing conditions. Apply additional resin as required to top of the Reemat to aid in conformity.
Allow Reemat base reinforcement to cure. Apply top coat to cured base coat with resin in specified mils quantity. Allow to cure.
 

 

Documents