Product Data Sheet
Show all documents

Sikacryl® Ready-Mix Concrete Patch

Acrylic-based, textured concrete patch for spalls/large cracks

Sikacryl® Ready-Mix Concrete Patch is an easy to use, acrylic-based, textured concrete patch for repairing spalls and cracks in concrete and masonry that cures to a tough and durable finish.

  • For vertical and horizontal surfaces
  • Textured to blend with concrete
  • Easy water clean up
  • Good adhesion
  • Simple application
  • Won’t shrink or crack
Product Data Sheet
Show all documents

Usage

Sikacryl® Ready-Mix Concrete Patch can be used on concrete and masonry surfaces, such as:
  • Sidewalks
  • Steps
  • Balconies
  • Foundations
  • Patios, and more.
 

Advantages

  • For vertical and horizontal surfaces
  • Textured to blend with concrete
  • Easy water clean up
  • Good adhesion
  • Simple application
  • Won’t shrink or crack

Packaging

1 qt. (.94 L) plastic container, 12/case

1 gal. (3.8 L) plastic container, 2/case

Color

Gray

Product Details

Product Information

Shelf Life

24 months in original, unopened containers

Storage Conditions

Store away from extreme heat or cold. Store in original container between 40 to 90 °F (4 to 32 °C)

Application

Application Information

Mixing Ratio

None

Ambient Air Temperature

40 to 90 °F (4 to 32 °C)

Cure Time

Full Cure: Minimum of 1 day at 1/4 in. (6.3 mm) depth depending on temperature

Set Time

2 to 4 hours
Consumption

Coverage

1 quart cover approximately 20 sq. ft. at 1/32 in. (.8 mm.)

1 gallon covers approximately 80 sq. ft. at 1/32 in. (.8 mm.)
Application steps

MIXING

Stir material thoroughly until a uniform appearance and consistency is achieved prior to use.

APPLICATION

Use a putty knife or trowel to apply product to surface. Ensure that enough product is pushed into crack or hole to provide coverage. Tool as required. Areas greater than 1/4 in. (6.3 mm) deep will require two or more applications. For applications greater than 1/4 in. (6.3 mm) depth, allow the material to dry between applications. Apply at a minimum thickness of 1/32 in. (0.8 mm). Allow repaired area to dry and fully cure for at least 24 hours, depending on temperature, humidity and depth of repair.

CLEANING OF TOOLS

Clean tools immediately after use with water.

Documents