Product Data Sheet
Show all documents

Sikacryl® Ready-Mix Stucco Patch

acrylic-based, textured stucco patch for repairing spalls/large cracks in stucco

Sikacryl® Ready-Mix Stucco Patch is an easy to use, acrylic-based, textured stucco patch for repairing spalls and cracks in stucco that cures to a tough and durable finish.

  • Easy to tool
  • Textured to blend with stucco finish
  • Easy water clean up
  • Won’t shrink or crack
  • Paintable
  • Moisture resistant
  • Interior / Exterior use
  • VOC Compliant
Product Data Sheet
Show all documents

Usage

Sikacryl® Ready-Mix Stucco Patch can be used on a masonry surface, exterior finish, foundation, and more. Any location a stucco finish has been used.  

Advantages

  • Easy to tool
  • Textured to blend with stucco finish
  • Easy water clean up
  • Won’t shrink or crack
  • Paintable
  • Moisture resistant
  • Interior / Exterior use
  • VOC Compliant

Packaging

1 qt. (.94 L) plastic container, 12/case

Color

off white

Product Details

Product Information

Shelf Life

24 months in original, unopened containers

Storage Conditions

Store away from extreme heat or cold. Store in original container between 40 to 90 °F (4 to 32 °C)

  

Application

Application Information

Ambient Air Temperature

40 to 90 °F (4 to 32 °C)

Waiting / Recoat Times

Tack Free: 2-4 hours

Full Cure: Minimum of 1 day at 1/4 in. (6.3 mm) depth depending on temperature

 
Consumption

Coverage

1 quart cover approximately 20 sq. ft. at 1/32 in. (.8 mm.)
Application steps

MIXING

Stir material thoroughly until a uniform appearance and consistency is achieved prior to use.

APPLICATION

Use a putty knife or trowel to apply product to surface. Ensure that enough product is pushed into crack or hole to provide coverage. Tool as required. Areas greater than 1/4 in. (6.3 mm) deep will require two or more applications. For applications greater than 1/4 in. (6.3 mm) depth, allow the material to dry between applications. Apply at a minimum thickness of 1/32 in. (0.8 mm). Allow repaired area to dry and fully cure for at least 24 hours, depending on temperature, humidity and depth of repair.

CLEANING OF TOOLS

Clean tools immediately after use with water.

Documents