Sika® LiquidWeld Blu

12 months in original, unopened containers

Store in cool, frost-free conditions with temperatures between 50°F to 90°F (10°C to 32°C). Condition material between 60° to 75°F (15° to 24°C) before using.

Approx. 1 hour depending on temperature and humidity

1 jug yields approx. 150 - 300 ft²  depending upon actual porosity of the prepared substrate.

• Prior to installation, shake Sika® LiquidWeld Blu before use for consistent dispersion.
• Apply Undiluted (no water needed).

• Apply Sika® LiquidWeld Blu uniformly over the substrate using a stiff brush, broom, or roller to form a continuous film. 
• Reapply Sika® LiquidWeld Blu in areas that are not covered entirely. 
• Allow film to dry for approximately 1 hour prior to application of mortars, concrete, or stucco. 
• Drying times can be affected by temperature and humidity, check to make sure the product is dry to the touch before topping. 
• Extremely porous substrates may require two coats of Sika® LiquidWeld Blu. 
• Protect newly applied Sika® LiquidWeld Blu from dust, dirt, debris, and moisture. 
• Sika® LiquidWeld Blu can be left untopped by mortars, concrete, stucco, etc. for up to 10 days if properly protected from debris and moisture.