Product Data Sheet Safety Data Sheet Show all documents
Perimeter Warning Tape

Perimeter Warning Tape

A reflective, highly visible tape

Perimeter Warning Tape is designed for use on all Sarnafil® and Sikaplan® membranes as a reflective, highly visible product to draw attention to roof perimeters and potential hazardous areas.

  • Increases safety
  • Resists salt spray and many commonly used chemicals
Product Data Sheet Safety Data Sheet Show all documents

Usage

To indicate roof perimeters and potential hazard areas    Areas of Application
  • New Roofs
  • Recover Roofs
  • Mechanically Fastened Systems
  • Adhered Systems
 

Advantages

  • Increases safety
  • Resists salt spray and many commonly used chemicals

Packaging

10 per box, 300 ft. (91.4 m) per box

Color

Yellow

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Exceeds reflectivity 3 requirements, Federal Spec  L-S-300, Class 1 and FP-79 type II
 
Product Information

Chemical Base

The warning tape is made of vinyl and comes with a liner on the back for easy installation.

Shelf Life

N/A

Storage Conditions

N/A

Length

30 ft (9.1 m)

Width

2" (50.8 mm)

Thickness

5 mil (0.13 mm)

Application

Application steps

APPLICATION

Membrane where the tape is to be applied must be cleaned to a “like new” condition. Failure to properly clean the membrane will result in less than satisfactory adhesion. Do not apply Perimeter Warning Tape when the temperature is below 40°F (4°C).

Perimeter Warning Tape may be slippery when wet.

 

Documents