Product Data Sheet
Show all documents
Sika® Air-360

Sika® Air-360

AIR ENTRAINING ADMIXTURE

Sika® Air-360 is an aqueous solution of a unique, synthetically manufactured surfactant for the air entrainment of concrete. Sika® Air-360 meets the requirements of ASTM C260/AASHTO M 154.

Sika® Air-360 provides an enhanced concrete durability with a greater resistance to freeze-thaw cycles. Sika® Air-360 also provides:   
  • Controllability of the air content,
  • Improved air-void system,
  • Reduced size and number of capillary channels,
  • Improved workability especially in lean or harsh mixes,
  • Reduced bleeding.
   Sika® Air-360 does not contain intentionally added chlorides.
Product Data Sheet
Show all documents

Usage

Sika® Air-360 is designed for use in concrete requiring air entrainment and protection from freeze-thaw damage or the harmful effect of de-icing salts. Sika® Air-360 is specifically designed for use in low or no slump concrete, but is suitable for use in a variety of concrete mixes. Sika® Air-360 may be used to produce Controlled Low Strength Material (CLSM), also referred to as flowable fill, controlled density fill (CDF), lean mix backfill, unshrinkable fill or flowable mortar. CLSM eliminates the need for compaction of layered backfill and is significantly faster and less labor intensive.  

Advantages

Sika® Air-360 provides an enhanced concrete durability with a greater resistance to freeze-thaw cycles. Sika® Air-360 also provides:   
  • Controllability of the air content,
  • Improved air-void system,
  • Reduced size and number of capillary channels,
  • Improved workability especially in lean or harsh mixes,
  • Reduced bleeding.
   Sika® Air-360 does not contain intentionally added chlorides.

Packaging

Available in 55-gallon (208-liter) drums, 275-gallon (1040-liter) totes and bulk delivery.

Color

Light Yellow Liquid

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

Lower carbon footprint through reduction in cementitious materials and in some cases sand. More durable concrete enhancing service life.

  

A Manufacturer Inventory is available for Sika® Air-360.
Product Information

Shelf Life

Shelf life when stored in original packaging in dry warehouse conditions between 40°F and 80°F (5-27°C) is one year from the date of manufacture.

Storage Conditions

Sika® Air-360 should be stored above 40°F (5°C). If frozen, thaw and agitate thoroughly to return to a normal state. If agitation is needed, DO NOT use pressurized air. Protect from direct sunlight.

Specific gravity

Approx. 1.010

Application

Application Information

Mixing

Measure the required quantity manually or by automated dispenser. Add Sika® Air-360 directly to the mixing water or to the sand stream, do NOT mix with dry cement. Sika® Air-360 may be dispensed on-site directly prior to placement. Care must be taken to mix thoroughly. When used in combination with other admixtures dispense each admixture separately into the mix.

  

Compatibility: Sika® Air-360 can be used in combination with other Sika admixtures and can be successfully used in mix designs utilizing supplementary cementitious materials.
Consumption

Recommended Dosage

The typical dosage rate of Sika® Air-360 will vary between 0.1-6.0 fl oz / 100 lb. (7-400 mL / 100 kg) of cement or cementitious materials. Various factors will affect the dosage rates.

  

Trial mixes with the actual materials should be conducted to determine the required dosage for optimum performance.

  

To the extent specialized materials are used, extreme ambient temperatures are encountered, or for other unusual project conditions, dosage rates outside the typical range may be required. For dosage rates outside the typical range, please contact your local Sika representative or the Sika Technical Services Department at 1-800-933-7452.

Documents