Product Data Sheet Show all documents

Sikacrete®-550

SHOTCRETE MATERIAL WITH CRYSTALLINE WATERPROOFING FOR DRY-MIX APPLICATIONS

Sikacrete®-550 is a pre-blended and pre-packaged shotcrete material formulated with a crystalline waterproofer and accelerator for dry-mix process applications. It contains Portland cement, blended aggregates, and other carefully selected components to enhance shooting characteristics and physical properties.

    Sikacrete®-550 provides the following benefits:   
    • Improved adhesive and cohesive plastic properties,
    • Significantly reduced rebound, resulting in lower material usage,
    • Lower equipment and labor costs compared to alternative application processes.
       Sikacrete®-550 is blended with the combination of the following optional features and benefits:    Gradation
    • Blended to meet ACI 506 - Guide to Shotcrete, Table 1.1.,
    • Both Gradation No. 1 and Gradation No. 2 are available options,
    • By default Sikacrete®-550 is blended with Gradation No. 2.
    Product Data Sheet Show all documents

    Usage

    Sikacrete®-550 can be used for applications including but not limited to:   
    • Rehabilitation of concrete structures,
    • New construction including slope stabilization, soilnailing, shaft and tunnel linings,
    • Initial and secondary tunnel support.
     

    Advantages

      Sikacrete®-550 provides the following benefits:   
      • Improved adhesive and cohesive plastic properties,
      • Significantly reduced rebound, resulting in lower material usage,
      • Lower equipment and labor costs compared to alternative application processes.
         Sikacrete®-550 is blended with the combination of the following optional features and benefits:    Gradation
      • Blended to meet ACI 506 - Guide to Shotcrete, Table 1.1.,
      • Both Gradation No. 1 and Gradation No. 2 are available options,
      • By default Sikacrete®-550 is blended with Gradation No. 2.

      Packaging

      Available in 1,675 lb (760 kg), 1,700 lb (771 kg), 3,350 lb (1,520 kg), and 3,400 lb (1,542 kg) bulk bags.

      Product Details

      Product Information

      Shelf Life

      Shelf life when stored in dry warehouse conditions between 40°F and 95°F (5-35°C) is one year from the date of manufacture.

      Storage Conditions

      Sikacrete®-550 must be stored in a dry environment. If exposed or unprotected Sikacrete®-550 will absorb moisture resulting in an unusable product. Physical properties may be adversely affected if stored in temperatures below 40°F (5°C) and material should be allowed to warm to ambient underground temperatures before use.

       
      Technical Information

      Compressive Strength

      ASTM C1604

      1 day

      1,500 psi (10 MPa)

      7 days

      3,000 psi (20 MPa)

      28 days

      4,500 psi (30 MPa)

      Freeze-Thaw Stability

      Durability Factor: 95%

      ASTM C666

      Porosity

      BOILED ABSORPTION

      5%

      VOLUME OF PERMEABLE VOIDS

      14%

      Application

      Application Information

      Thinner

      ASTM C403

      Initial

      10 min

      Final15 min
      Consumption

      Coverage

      Approx. 0.5 yd3 per 1,700 lb bulk bag (0.38 m3 per 771 kg bulk bag)

      Approx. 1.0 yd3 per 3,400 lb bulk bag (0.76 m3 per 1,542 kg bulk bag)

        

      REBOUND

      EXTERNAL CONSULTANT

      Vertical< 12%
      Overhead< 20%
      Application steps

      APPLICATION INSTRUCTIONS

      • Apply in accordance with ACI 506 - Guide to Shotcrete.
      • Performance of in-place shotcrete relies heavily upon application techniques. The shotcrete material, equipment, and key personnel should be pre-qualified prior to project start-up to ensure optimum quality of in-place shotcrete.
       

      OPTIMUM PERFORMANCE

        

      • Product should not be applied when ambient, substrate, and material temperatures are below 40°F (5°C) or above 95°F (35°C).
      • For adverse temperatures follow ACI recommendations for Cold/Hot Weather Concreting.

        

      Contact your Sika STM Technical Representative for more information.

      EQUIPMENT

      • Special precautions needed when using predampeners with dry blended powdered accelerated shotcrete.

        

      Contact your Sika STM Technical Representative for more information.

       

      SURFACE PREPARATION

      • Repair or rehabilitation: All surfaces to be in contact with Sikacrete®-550 and its variations must be free from dust, oil, grease or any other foreign substances that may interfere with the bond of the material. Remove all loose or delaminated concrete providing a roughened surface and a minimum of 1 inch (25 mm) clearance behind any corroded reinforcing steel. The perimeter of the repair area should be saw-cut a minimum of ¾ inch (20 mm). Clean the area to be repaired with potable water, leaving the concrete saturated but free of standing water (SSD).
      • Rock surfaces: All surfaces to be in contact with Sikacrete®-550 must be free from dust, oil, grease or any other foreign substances that may interfere with the bond of the material. Remove all loose or delaminated rock. Clean the area with potable water, leaving the substrate saturated but free of standing water (SSD).

      CURING TREATMENT

      • Curing is essential to optimize physical properties of the shotcrete and minimize plastic shrinkage. Product should be cured immediately after material has reached initial set in accordance with ACI 308 - Guide to External Curing Concrete. Continuously moist cure for a minimum period of seven (7) days. Alternatively, moist cure for a minimum period of 24 hours and apply a curing compound that complies with ASTM C309. Curing is particularly critical in rapid moisture loss conditions such as high temperatures, high winds and low humidity.
      • Underground Environments: Good curing conditions are beneficial to optimizing physical properties. Although the high relative humidity commonly found in underground environments provides for good curing conditions, additional curing is often appropriate and should be performed in accordance with ACI 308 - Guide to External Curing Concrete.

      CLEANING OF TOOLS

      • Clean all tools and equipment after use with water. Once hardened, the product can only be removed mechanically.

      Documents