Product Data Sheet Safety Data Sheet Show all documents

SikaBond®-910 Construction Adhesive

ONE PART, ADVANCED POLYURETHANE, ELASTOMERIC ADHESIVE

SikaBond®-910 Construction Adhesive is a one-component, durable and flexible interior and exterior polyurethane adhesive. It has excellent adhesion on all cement-based materials, brick, ceramics, glass, metals and wood.

  • Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals and wood
  • Fast cure rate
  • Waterproof and water immersible after cure
  • Good weathering resistance
  • Non-corrosive
  • Can be painted over with water, oil, and rubber-based paints (preliminary tests are recommended)
  • High durability and flexible
  • Can be used to fill in gaps, gray in color
Product Data Sheet Safety Data Sheet Show all documents

Usage

As an elastic adhesive for:
  • Paver caps, masonry veneer and faux stone
  • Submerged applications (ex. pond)
  • Net tile installation
  • Floor moldings and door sills
  • Light weight construction materials
  • Wood or metal window and door frames
  • Glue assist installations (to assist with the nailing schedule of wood flooring)
 

Advantages

  • Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals and wood
  • Fast cure rate
  • Waterproof and water immersible after cure
  • Good weathering resistance
  • Non-corrosive
  • Can be painted over with water, oil, and rubber-based paints (preliminary tests are recommended)
  • High durability and flexible
  • Can be used to fill in gaps, gray in color

Packaging

  • 10.1 fl. oz. (299 ml) moisture proof composite cartridge, 12/case
  • 20 fl. oz. (600 ml) moisture proof foil sausage, 20/case
  • 29 fl. oz. (858 ml) moisture proof composite cartridge, 6/case

Color

Gray

Product Details

Product Information

Chemical Base

1-component, moisture cured polyurethane

Shelf Life

12 months from the date of production if stored properly

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions and protected from direct sunlight at
temperatures between 40°F and 95°F (4°C and 35°C).

Condition material between 65°F and 75°F (18°C and 24°C) before using.

 
Technical Information

Tensile Strength

~225 psi (~1.55 MPa) at 73°F (23°C) and 50% RH

(ASTM D412)

Elongation

~600% at 73°F (23°C) and 50% RH

(ASTM D412)

Chemical Resistance

Good resistance to water, diluted acids and diluted alkalines. Consult Technical Service for specific data.

Resistance to Weathering

Excellent

Service Temperature

-40°F to 170°F (-40°C to 77°C)

Application

Application Information

Ambient Air Temperature

40°F to 100°F (4°C to 38°C)

Curing Rate

5 to 7 days

Skin Time

1-2 hours at 73°F (23°C) 50% RH

(TT-S-00230C)

Skin time depends on temperature and humidity
Consumption

Coverage

  • 10.1 fl. oz. cartridge yields ~12.2 lineal ft. of 1/2 in. x 1/4 in. bead
  • 20 fl. oz. sausage yields ~24 lineal ft. of 1/2 in. x 1/4 in. bead
  • 29 fl. oz. cartridge yields ~35 lineal ft. of 1/2 in. x 1/4 in. bead
Application steps

SUBSTRATE PREPARATION

  • Surface must be structurally sound, clean, dry, frost-free, and free of dirt, loose particles, oil and grease.
  • Curing compound residues and any other foreign matter must be thoroughly removed.
  • Priming is not usually necessary for non-absorbent materials such as anodized aluminum, steel,  glass, ceramics, stoneware and tiles.

CLEANING OF TOOLS

Clean all tools and equipment immediately after use with a dry cloth; xylene, mineral spirits or acetone may also be used. Cured material must be mechanically removed.

Documents