Sikalastic® M 290 FS

• CSA S413
• ASTM C957

Polyurethane-Modified Methyl Methacrylate

1 year

Store properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between 41°F and 86 °F (5°C and 30 °C). Materials must be protected from heat, direct sunlight, moisture and impact. The materials should be stored between 65°F to 75 °F (18°C to 24 °C) for 24 hours prior to use for optimum handling properties. Do not store near open flame or an ignition source

Mixing Chart shows required amount of Sikalastic®-918 FS (in volume ounces) for one-gallon resin, based on temperature.

7-15 min, dependent on temperature

1-1.5 hours, dependent on temperature

32 sf/gal at 50 mils

20 sf/gal at 80 mils

• Pre-Mix Sikalastic® M 290 FS until uniform (1-2 minutes). Measure 1 gallon of resin and add the proper amount of powder hardener Sikalastic®-918 FS. See mixing chart below.  Mix with drill mixer for 3 minutes.   

See Mixing Chart for required amount of Sikalastic®-918 FS (in volume ounces) for one-gallon resin, based on temperature.

Note: After mixing, apply immediately. You will have 7 – 15 minutes of working time, dependent on temperature.

Sikalastic® M 290 FS requires Sikalastic® P 280FS/908FS or P 281FS/908FS resin as a primer for all applications. 

Apply Sikalastic® M 290 FS using a notched tool (or trowel). Material may not be completely tack-free upon cure. Backroll the Sikalastic® M 290 FS only if necessary, to aid in leveling, if performed, backroll must be done immediately.

Please see the applicable Sikalastic®Deck Coating system data sheet for total system and aggregate surface preparation and application.
  

All components of the Sikalastic® Traffic 2900 system fully cure within one hour when properly installed. Extend the curing time in cool-weather conditions.

Clean tools with Sikafloor®-100 CLN Pronto, an MMA solvent. Other solvents such as xylene or acetone may also be used. Collect and dispose of all site waste.