Product Data Sheet Show all documents
Sikalastic® TC 297 FS

Sikalastic® TC 297 FS

(formerly MSeal TC 297FS)

A METHYL METHACRYLATE (MMA) SOLVENT-FREE, TWO-COMPONENT, 100% REACTIVE INTERMEDIATE COAT

Sikalastic® TC 297 FS is an MMA, solvent-free, two-component, 100% reactive intermediate coat. For use in the Sikalastic® Traffic 2900 System.

  • Rapid cure allows for quick installation with minimal facility downtime
  • Low-temperature cure extends application season
  • Seamless, impervious coating that is easy to clean and maintain
  • Flexible system that withstands temperature swings
Product Data Sheet Show all documents

Usage

  • Stadiums
  • Parking Garages
  • Plaza Decks
  • Loading Docks
  • Garbage Rooms
  • Commercial Construction
  • Building and Restoration
 

Advantages

  • Rapid cure allows for quick installation with minimal facility downtime
  • Low-temperature cure extends application season
  • Seamless, impervious coating that is easy to clean and maintain
  • Flexible system that withstands temperature swings

Packaging

4.5-Gal (17L) pail; 53.5-Gal (202.5L) drum

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • CSA S413
  • ASTM C957
Product Information

Chemical Base

Methyl Methacrylate (MMA) Coating

Shelf Life

2 years

Storage Conditions

Store properly in original, unopened, and undamaged sealed packaging, in dry conditions at temperatures between 41°F and 86 °F (5°C and 30 °C). Materials must be protected from heat, direct sunlight, moisture, and impact. The materials should be stored between 65°F to 75 °F (18°C to 24 °C) for 24 hours prior to use for optimum handling properties. Do not store near open flame or an ignition source.

Solid content by mass

100%

(ASTM D 1259)

 

 
Technical Information

Shore Hardness

61

(ASTM D 2250), Shore A

Tensile Strength

1350 psi (9.31 MPa)

(ASTM D 412)

Elongation

140%

(ASTM D 412)

Crack Bridging Ability

Pass

(ASTM C 957)

Application

Application Information

Mixing Ratio

Mixing Chart shows the required amount of Sikalastic®-918 FS (in volume ounces) for one-gallon Sikalastic® TC 297 FS resin, based on temperature.

 

°F (°C)

Sikalastic®-918 FS (fl. oz)

°30 (°-1)

11

°33 (°1)

11

°35 (°2)

11

°40 (°4)11
°45 (°7)9
°50 (°10)8.5
°55 (°13)7.5
°60 (°16)6.5
°65 (°18)5.5
°70 (°21)4.5
°76 (°24)4
°80 (°27)3
°85 (°29)2.5
°90 (°32)2
Application steps

MIXING

Color

  • Sikalastic® TC 297 FS: Mix 3 oz of Sikafloor® PGM 155 pigment for every one (1) gallon of resin

Mixing

See Mixing Chart for the required amount of Sikalastic®-918 FS (in volume ounces) for one-gallon of Sikalastic® TC 297 FS resin, based on temperature.

  • Sikalastic® TC 297 FS Measure 1 gallon of resin and 3 oz of PGM 155 pigment into a 5-gallon pail. Mix for 2-3 minutes. Add the proper amount of Sikalastic®-918 FS (powder hardener) and mix for an additional 1-2 minutes.

Note: After mixing, apply immediately. You will have 7 – 15 minutes of working time, dependent on temperature.

 

APPLICATION

Apply Sikalastic® TC 297 FS using a notched tool (or trowel). Material may not be completely tack free upon cure. Backroll the Sikalastic® TC 297 FS only if necessary, to aid in leveling. If performed, backroll must be done immediately.

Please see the applicable Sikalastic® Deck Coating system data sheet for total system, aggregate surface preparation, and application.

CURING TREATMENT

All components of the Sikalastic® Traffic 2900 system fully cure within one hour when properly installed. Extend the curing time in cool-weather conditions.

CLEANING OF TOOLS

Clean tools with Sikafloor®-100 CLN Pronto, an MMA solvent. Other solvents such as xylene or acetone may also be used. Collect and dispose of all site waste.

Documents