Product Data Sheet Show all documents
SikaProof® A+ 12

SikaProof® A+ 12

FPO sheet membrane for pre- and post-applied fully bonded below ground waterproofing

SikaProof® A+ 12 is a polyolefin (FPO) based sheet membrane for below ground waterproofing of reinforced concrete structures. It is loose laid onto prepared substrates or formwork before fixing reinforcement and casting concrete. A special hybrid bonding layer on the membrane forms a permanent bond with the fresh concrete. Overlap joints are sealed using cold-applied tapes. The total thickness is 68 mil. 

  • Dual bond: Full and permanent mechanical and adhesive bond with concrete structure
  • Can be used as a pre- and post-applied system
  • No lateral water migration between concrete and membrane 
  • Excellent barrier to radon
  • Fast and easy installation
  • High flexibility and crack-bridging capabilities 
  • High watertightness tested according to various standards
  • Resistant to aggressive conditions in natural ground water and soil
  • Temporarily resistant to weathering and UV exposure
  • Joints can be sealed using thermal jointing
  • Can be combined with other approved Sika® waterproofing / joint sealing systems
Product Data Sheet Show all documents

Usage

The product is used for:  Damp-proofing, waterproofing and concrete protection for basements and other below ground concrete structures.   Suitable for use on:
  • Cast-in-situ reinfored concrete structures
  • Precast reinforced concrete structures
  • Existing reinforced concrete structures
 

Advantages

  • Dual bond: Full and permanent mechanical and adhesive bond with concrete structure
  • Can be used as a pre- and post-applied system
  • No lateral water migration between concrete and membrane 
  • Excellent barrier to radon
  • Fast and easy installation
  • High flexibility and crack-bridging capabilities 
  • High watertightness tested according to various standards
  • Resistant to aggressive conditions in natural ground water and soil
  • Temporarily resistant to weathering and UV exposure
  • Joints can be sealed using thermal jointing
  • Can be combined with other approved Sika® waterproofing / joint sealing systems

Packaging

Product

Roll width

Roll length

SikaProof® A+ 12

6.5 ft (2.0 m) or 3.2 ft (1.0 m)

65 ft (20 m)

Color

Light yellow membrane containing a light grey bonding layer

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

  • Environmental Product Declaration (EPD) in accordance with EN 15804. EPD independently verified by BRE Global
  • GreenCircle CERTIFIED: LEED v4 and v4.1 Compliant MR Credit Material Ingredients Option 1. Manufacturer Inventory 
Product Information

Chemical Base

Membrane Layer

Flexible Polyolefin (FPO)           

Hybrid Layer

Cement modified polymer

Shelf Life

18 months shelf life from date of production

Storage Conditions

Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between 40 °F (+5 °C) and 86 °F (+30 °C). Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.

Effective Thickness

Total Thickness (=deff)

68 mil (-5/+10 %)

Membrane Thickness

47 mil (-5/+10 %)
System information

System Structure

The following products are part of the pre-applied system:

  • SikaProof® A+ 12 
  • SikaProof® Tape A+
  • SikaProof® Sandwich Tape (optional) 

 

The following products are part of the post-applied system:

  • SikaProof® A+ 12
  • SikaProof® Adhesive-22 
  • SikaProof® ExTape-100 

 

Accessories and complementary products are available to provide detailing and connection solutions.
Technical Information

Impact Strength

200 lbs (no puncture)

(ASTM E154)

Tensile Strength

5.7 MPa (832 psi)

(ASTM D412)

Elongation

>1400%

(ASTM D412)

Adhesion in peel

22 lbf-in

(ASTM D903)

Joint Peel Resistance

32 lbf-in

(ASTM D1876)

Low Temperature Bend

Pass - no cracking at -29°C (-20°F)

(ASTM D1970)

Water Tightness

Pass, up to 7 bar (234 ft)

(ASTM D5385)

Resistance to lateral water migration

Pass, up to 7 bar (234 ft)

(ASTM D5385 Modified)

Permeability to radon

4.8 x 10-13 m2/s - 6.3 x 10-13 m2/s 

(ISO/TS 11665-13)

Durability of Water Tightness against Chemicals

Pass (28 d/+23 °C)

(EN 1847)

Pass (Method B, 24 h)

(EN 1928)

Durability of Water Tightness against Ageing

Pass (12 weeks)

(EN 1847)

Pass (Method B, 24 h/60 kPa)

(EN 1928)

Application

Application Information

Substrate Moisture Content

No Standing Water (refer to important considerations for more information)
Application steps

EQUIPMENT

  • Tape measure
  • Marking pen
  • Razor knife
  • Scissors
  • Pressure roller
  • Clean lint-free cloth
  • Metal straight edge for cutting
  • Protective sheet for cutting

SUBSTRATE QUALITY

Pre-Applied

SikaProof® A+ 12 membrane must be applied on a sufficiently stable substrate to avoid movement during the construction works. Substrate surface must be smooth, uniform and clean. Large gaps and voids (≥ 0.5 in) must be filled before membrane installation. Substrate can be damp or slightly wet, ponding water must be avoided. Suitable membrane fixing substrates include:

  • Concrete blinding
  • Formwork
  • Rigid thermal insulation
  • Plywood sheets / forms
  • well compacted soil

 

Post-Applied

The SikaProof® A+ 12 post-applied system must be applied on to hardened concrete (≥ 48 hours after pouring). Remove any weak concrete, high spots/protrusions, existing coatings, etc., to achieve a fine-gripping profile that is free from dirt, lose particles, grease, formwork release agents, oil and any other from of surface contamination. 

Documents